Fine tune values

- Using Actions
- Rewire logic
- Add usage of telemetry
- Initial Field states

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/CONTROLS.md

@@ -0,0 +1,12 @@
+# Controller 1
+
+## Motor Controls
+
+- Left Joystick
+  - Forward & Backwards
+- Right Joystick
+  - Strafe & Turning 
+
+## Arm Controls
+
+- 

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/CometBotAuto.java

@@ -0,0 +1,35 @@
+package org.firstinspires.ftc.teamcode;
+
+import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.runmodes.Auto;
+
+
+@Autonomous(name = "CometBot Auto", group = "Competition")
+public class CometBotAuto extends OpMode {
+    public Auto auto;
+
+    @Override
+    public void init() {
+        auto = new Auto(hardwareMap, telemetry, new Follower(hardwareMap));
+    }
+
+    @Override
+    public void start() {
+        auto.start();
+    }
+
+    @Override
+    public void loop() {
+        auto.update();
+        telemetry.addData("Arm State", auto.arm.getState());
+        telemetry.addData("Arm Position", auto.arm.getPosition());
+        telemetry.addData("Claw State", auto.claw.getState());
+        telemetry.addData("Wrist State", auto.wrist.getState());
+        telemetry.addData("Wrist Position", auto.wrist.getPosition());
+        telemetry.update();
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/CometBotDrive.java

@@ -0,0 +1,26 @@
+package org.firstinspires.ftc.teamcode;
+
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+import com.qualcomm.robotcore.eventloop.opmode.TeleOp;
+
+import org.firstinspires.ftc.teamcode.runmodes.CometBotTeleopCompetition;
+import org.firstinspires.ftc.teamcode.runmodes.DevTeleopRunModeCompetition;
+
+@TeleOp(name = "ComeBot Drive", group = "Competition")
+public class CometBotDrive extends OpMode {
+
+    public CometBotTeleopCompetition runMode;
+
+    @Override
+    public void init() {
+        this.runMode = new CometBotTeleopCompetition(hardwareMap, telemetry, gamepad1, gamepad2);
+        this.runMode.init();
+    }
+
+    @Override
+    public void loop() {
+        this.runMode.update();
+        telemetry.update();
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/DevTeleOpRemix.java

@@ -0,0 +1,97 @@
+package org.firstinspires.ftc.teamcode;
+
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+import com.qualcomm.robotcore.eventloop.opmode.TeleOp;
+import com.qualcomm.robotcore.hardware.Gamepad;
+
+import org.firstinspires.ftc.teamcode.subsystem.ArmSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.ClawSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.LiftSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.MotorsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.WristSubsystem;
+
+@TeleOp(name = "Dev Teleop Remix", group = "Debug")
+@Disabled
+public class DevTeleOpRemix extends OpMode {
+
+    public ClawSubsystem claw;
+    public ArmSubsystem arm;
+    public WristSubsystem wrist;
+    public LiftSubsystem lift;
+    public MotorsSubsystem motors;
+
+    public Gamepad currentGamepad1;
+    public Gamepad previousGamepad1;
+    public Gamepad currentGamepad2;
+    public Gamepad previousGamepad2;
+
+    public double power = .6;
+
+    @Override
+    public void init() {
+
+        claw = new ClawSubsystem(hardwareMap, telemetry);
+        arm = new ArmSubsystem(hardwareMap, telemetry);
+        wrist = new WristSubsystem(hardwareMap, telemetry);
+        lift = new LiftSubsystem(hardwareMap, telemetry);
+        motors = new MotorsSubsystem(hardwareMap, telemetry, power);
+
+        claw.init();
+        arm.init();
+        wrist.init();
+        lift.init();
+        motors.init();
+
+        currentGamepad1 = new Gamepad();
+        previousGamepad1 = new Gamepad();
+        currentGamepad2 = new Gamepad();
+        previousGamepad2 = new Gamepad();
+    }
+
+    public void theDrop(ArmSubsystem arm, WristSubsystem wrist) {
+        if (currentGamepad1.a && !previousGamepad1.a) {
+            wrist.toFloorPosition();
+            arm.toFloorPosition();
+        }
+    }
+
+    public void thePickup(ClawSubsystem claw) {
+        if (currentGamepad1.x && !previousGamepad1.x) {
+            claw.switchState();
+        }
+    }
+
+    public void theLift(ArmSubsystem arm, WristSubsystem wrist) {
+        if (currentGamepad1.b && !previousGamepad1.b) {
+            arm.toParkPosition();
+            wrist.toBucketPosition();
+        }
+    }
+
+    public void theLowBucketScore(LiftSubsystem lift, WristSubsystem wrist, ArmSubsystem arm) {
+        if (currentGamepad1.y && !previousGamepad1.y) {
+            lift.toLowBucket();
+            wrist.toBucketPosition();
+        }
+    }
+
+    @Override
+    public void loop() {
+
+        previousGamepad1.copy(currentGamepad1);
+        currentGamepad1.copy(gamepad1);
+
+        previousGamepad2.copy(currentGamepad2);
+        currentGamepad2.copy(gamepad2);
+
+        theDrop(arm, wrist);
+        thePickup(claw);
+        theLift(arm, wrist);
+        theLowBucketScore(lift, wrist, arm);
+
+        motors.calculateTrajectory(gamepad1);
+
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/DevTeleOpRemixDeux.java

@@ -0,0 +1,107 @@
+package org.firstinspires.ftc.teamcode;
+
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+import com.qualcomm.robotcore.eventloop.opmode.TeleOp;
+import com.qualcomm.robotcore.hardware.Gamepad;
+
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.subsystem.ArmSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.ClawSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.LiftSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.MotorsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.WristSubsystem;
+
+@TeleOp(name = "Dev Teleop Remix Deux", group = "Debug")
+@Disabled
+public class DevTeleOpRemixDeux extends OpMode {
+
+    private Follower follower;
+
+    public ClawSubsystem claw;
+    public ArmSubsystem arm;
+    public WristSubsystem wrist;
+    public LiftSubsystem lift;
+    public MotorsSubsystem motors;
+
+    public Gamepad currentGamepad1;
+    public Gamepad previousGamepad1;
+    public Gamepad currentGamepad2;
+    public Gamepad previousGamepad2;
+
+    public double power = .6;
+
+    @Override
+    public void init() {
+
+        follower = new Follower(hardwareMap);
+
+        claw = new ClawSubsystem(hardwareMap, telemetry);
+        arm = new ArmSubsystem(hardwareMap, telemetry);
+        wrist = new WristSubsystem(hardwareMap, telemetry);
+        motors = new MotorsSubsystem(hardwareMap, telemetry);
+        lift = new LiftSubsystem(hardwareMap, telemetry);
+
+        claw.init();
+        arm.init();
+        wrist.init();
+        lift.init();
+        motors.init();
+
+        currentGamepad1 = new Gamepad();
+        previousGamepad1 = new Gamepad();
+        currentGamepad2 = new Gamepad();
+        previousGamepad2 = new Gamepad();
+
+        follower.setMaxPower(this.power);
+        follower.startTeleopDrive();
+
+    }
+
+    public void theDrop(ArmSubsystem arm, WristSubsystem wrist) {
+        if (currentGamepad1.a && !previousGamepad1.a) {
+            wrist.toFloorPosition();
+            arm.toFloorPosition();
+        }
+    }
+
+    public void thePickup(ClawSubsystem claw) {
+        if (currentGamepad1.x && !previousGamepad1.x) {
+            claw.switchState();
+        }
+    }
+
+    public void theLift(ArmSubsystem arm, WristSubsystem wrist) {
+        if (currentGamepad1.b && !previousGamepad1.b) {
+            arm.toParkPosition();
+            wrist.toBucketPosition();
+        }
+    }
+
+    public void theLowBucketScore(LiftSubsystem lift, WristSubsystem wrist, ArmSubsystem arm) {
+        if (currentGamepad1.y && !previousGamepad1.y) {
+            lift.toLowBucket();
+            wrist.toBucketPosition();
+        }
+    }
+
+    @Override
+    public void loop() {
+
+        previousGamepad1.copy(currentGamepad1);
+        currentGamepad1.copy(gamepad1);
+
+        previousGamepad2.copy(currentGamepad2);
+        currentGamepad2.copy(gamepad2);
+
+        theDrop(arm, wrist);
+        thePickup(claw);
+        theLift(arm, wrist);
+        theLowBucketScore(lift, wrist, arm);
+
+        follower.setTeleOpMovementVectors(-gamepad1.left_stick_y, -gamepad1.left_stick_x, -gamepad1.right_stick_x);
+        follower.update();
+
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/DevTeleop.java

@@ -0,0 +1,25 @@
+package org.firstinspires.ftc.teamcode;
+
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+import com.qualcomm.robotcore.eventloop.opmode.TeleOp;
+
+import org.firstinspires.ftc.teamcode.runmodes.DevTeleopRunMode;
+import org.firstinspires.ftc.teamcode.runmodes.DevTeleopRunModeCompetition;
+
+@TeleOp(name = "Dev Teleop RR Actions", group = "Debug")
+public class DevTeleop extends OpMode {
+
+    public DevTeleopRunModeCompetition runMode;
+
+    @Override
+    public void init() {
+        this.runMode = new DevTeleopRunModeCompetition(hardwareMap, telemetry, gamepad1, gamepad2);
+        this.runMode.init();
+    }
+
+    @Override
+    public void loop() {
+        this.runMode.update();
+        telemetry.update();
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/PedroConstants.java

@@ -14,6 +14,7 @@ public class PedroConstants {
 
 
     // Robot motor configurations
+    public static final String BRAIN_ROT = "Sikidi rizz 360 no teleop tf2 mama mia 2cool 4skool yasyasy yasyasyasyasyasyasyaysy ohio yes heh me is moar skeebeedee than u walked and got tripped on by your aunt my very educaded mother just served us nine what? just kydinfoiwfowefwofwioefoiejfeoiwjfomdsklfnslefknesfklnkfenfenkfeknfenkfeknfenkefnk";
     public static final String FRONT_LEFT_MOTOR = "Drive front lt";
     public static final String BACK_LEFT_MOTOR  = "Drive back lt";
     public static final String FRONT_RIGHT_MOTOR  = "Drive front rt";
@@ -58,7 +59,7 @@ public class PedroConstants {
     public static final double ROBOT_SPEED_LATERAL = 28.7119;
 
     // Rate of deceleration when power is cut-off when the robot is moving forward
-    public static final double FORWARD_ZERO_POWER_ACCEL = -57.805;
+    public static final double FORWARD_ZERO_POWER_ACCEL = -59.805;
 
     // Rate of deceleration when power is cut-off when the robot is moving to the right
     public static final double LATERAL_ZERO_POWER_ACCEL = -99.672;

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/SensorIMUOrthogonal.java

@@ -27,7 +27,7 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-package org.firstinspires.ftc.teamcode;
+package org.firstinspires.ftc.teamcode.cometbots;
 
 import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_ENCODER;
 import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_ENCODER_DIRECTION;
@@ -48,6 +48,7 @@ import com.qualcomm.robotcore.hardware.IMU;
 import org.firstinspires.ftc.robotcore.external.navigation.AngleUnit;
 import org.firstinspires.ftc.robotcore.external.navigation.AngularVelocity;
 import org.firstinspires.ftc.robotcore.external.navigation.YawPitchRollAngles;
+import org.firstinspires.ftc.teamcode.PedroConstants;
 import org.firstinspires.ftc.teamcode.pedroPathing.localization.Encoder;
 
 /*

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/AsherOrientBlue.java

@@ -1,9 +1,10 @@
-package org.firstinspires.ftc.teamcode;
+package org.firstinspires.ftc.teamcode.cometbots.poc;
 
 import com.acmerobotics.dashboard.FtcDashboard;
 import com.acmerobotics.dashboard.config.Config;
 import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
 import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
 import com.qualcomm.robotcore.eventloop.opmode.OpMode;
 
 import org.firstinspires.ftc.robotcore.external.Telemetry;
@@ -26,15 +27,16 @@ import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
  * @version 1.0, 3/12/2024
  */
 @Config
-@Autonomous(name = "AutoExampleTwo", group = "Autonomous Pathing Tuning")
+@Disabled
-public class AutoExampleTwo extends OpMode {
+@Autonomous(name = "AsherOrientBlue", group = "Autonomous Pathing Tuning")
+public class AsherOrientBlue extends OpMode {
     private Telemetry telemetryA;
 
     private Follower follower;
 
     private PathChain path;
 
-    private final Pose startPose = new Pose(10.0, 40, 90);
+    private final Pose startPose = new Pose(9.757, 84.983, 90);
 
     /**
      * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
@@ -49,30 +51,28 @@ public class AutoExampleTwo extends OpMode {
         follower.setStartingPose(startPose);
 
         path = follower.pathBuilder()
+                /*
+                * Only update this path
+                 */
                 .addPath(
                         // Line 1
                         new BezierLine(
-                                new Point(10.000, 40.000, Point.CARTESIAN),
+                                new Point(20.500, 7.800, Point.CARTESIAN),
-                                new Point(60.000, 40.000, Point.CARTESIAN)
+                                new Point(20.500, 87.500, Point.CARTESIAN)
                         )
                 )
-                .setConstantHeadingInterpolation(Math.toRadians(90))
                 .addPath(
                         // Line 2
                         new BezierLine(
-                                new Point(60.000, 40.000, Point.CARTESIAN),
+                                new Point(20.500, 87.500, Point.CARTESIAN),
-                                new Point(60.000, 25.000, Point.CARTESIAN)
+                                new Point(7.800, 87.500, Point.CARTESIAN)
-                        )
-                )
-                .setConstantHeadingInterpolation(Math.toRadians(90))
-                .addPath(
-                        // Line 3
-                        new BezierLine(
-                                new Point(60.000, 25.000, Point.CARTESIAN),
-                                new Point(10.000, 25.000, Point.CARTESIAN)
                         )
                 )
+
                 .setConstantHeadingInterpolation(Math.toRadians(90)).build();
+                /*
+                * End of only update this path
+                 */
 
         follower.followPath(path);
 

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/AsherPathBlueV1.java

@@ -0,0 +1,135 @@
+package org.firstinspires.ftc.teamcode.cometbots.poc;
+
+import com.acmerobotics.dashboard.FtcDashboard;
+import com.acmerobotics.dashboard.config.Config;
+import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
+import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierCurve;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierLine;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.PathChain;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
+
+/**
+ * This is the Circle autonomous OpMode. It runs the robot in a PathChain that's actually not quite
+ * a circle, but some Bezier curves that have control points set essentially in a square. However,
+ * it turns enough to tune your centripetal force correction and some of your heading. Some lag in
+ * heading is to be expected.
+ *
+ * @author Anyi Lin - 10158 Scott's Bots
+ * @author Aaron Yang - 10158 Scott's Bots
+ * @author Harrison Womack - 10158 Scott's Bots
+ * @version 1.0, 3/12/2024
+ */
+@Config
+@Disabled
+@Autonomous(name = "AsherPathBlueV1", group = "Autonomous Pathing Tuning")
+public class AsherPathBlueV1 extends OpMode {
+    private Telemetry telemetryA;
+
+    private Follower follower;
+
+    private PathChain path;
+
+    private final Pose startPose = new Pose(9.757, 84.983, 90);
+
+    /**
+     * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
+     * initializes the FTC Dashboard telemetry.
+     */
+    @Override
+    public void init() {
+        follower = new Follower(hardwareMap);
+
+        follower.setMaxPower(.4);
+
+        follower.setStartingPose(startPose);
+
+        path = follower.pathBuilder()
+                /*
+                * Only update this path
+                 */
+                .addPath(
+                        // Line 1
+                        new BezierCurve(
+                                new Point(7.800, 87.5, Point.CARTESIAN),
+                                new Point(19.000, 116.000, Point.CARTESIAN),
+                                new Point(93.000, 118.000, Point.CARTESIAN),
+                                new Point(45.000, 115.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 2
+                        new BezierLine(
+                                new Point(45.000, 115.000, Point.CARTESIAN),
+                                new Point(14.000, 126.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 3
+                        new BezierCurve(
+                                new Point(14.000, 126.000, Point.CARTESIAN),
+                                new Point(43.000, 112.500, Point.CARTESIAN),
+                                new Point(64.000, 92.000, Point.CARTESIAN),
+                                new Point(77.000, 117.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 4
+                        new BezierLine(
+                                new Point(77.000, 117.000, Point.CARTESIAN),
+                                new Point(20.000, 135.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 5
+                        new BezierCurve(
+                                new Point(20.000, 135.000, Point.CARTESIAN),
+                                new Point(113.000, 95.000, Point.CARTESIAN),
+                                new Point(69.000, 135.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 6
+                        new BezierLine(
+                                new Point(69.000, 135.000, Point.CARTESIAN),
+                                new Point(20.500, 135.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 7
+                        new BezierCurve(
+                                new Point(20.500, 135.000, Point.CARTESIAN),
+                                new Point(101.500, 95.500, Point.CARTESIAN),
+                                new Point(72.500, 95.500, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90)).build();
+                /*
+                * End of only update this path
+                 */
+
+        follower.followPath(path);
+
+        telemetryA = new MultipleTelemetry(this.telemetry, FtcDashboard.getInstance().getTelemetry());
+        telemetryA.update();
+    }
+
+    /**
+     * This runs the OpMode, updating the Follower as well as printing out the debug statements to
+     * the Telemetry, as well as the FTC Dashboard.
+     */
+    @Override
+    public void loop() {
+        follower.update();
+        if (follower.atParametricEnd()) {
+            follower.followPath(path);
+        }
+        follower.telemetryDebug(telemetryA);
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/AsherPathV1.java

@@ -0,0 +1,137 @@
+package org.firstinspires.ftc.teamcode.cometbots.poc;
+
+import com.acmerobotics.dashboard.FtcDashboard;
+import com.acmerobotics.dashboard.config.Config;
+import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
+import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierCurve;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierLine;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.PathChain;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
+import com.acmerobotics.roadrunner.SleepAction;
+/**
+ * This is the Circle autonomous OpMode. It runs the robot in a PathChain that's actually not quite
+ * a circle, but some Bezier curves that have control points set essentially in a square. However,
+ * it turns enough to tune your centripetal force correction and some of your heading. Some lag in
+ * heading is to be expected.
+ *
+ * @author Anyi Lin - 10158 Scott's Bots
+ * @author Aaron Yang - 10158 Scott's Bots
+ * @author Harrison Womack - 10158 Scott's Bots
+ * @version 1.0, 3/12/2024
+ */
+@Config
+@Disabled
+@Autonomous(name = "AsherPathV1", group = "Autonomous Pathing Tuning")
+public class AsherPathV1 extends OpMode {
+    private Telemetry telemetryA;
+
+    private Follower follower;
+
+    private PathChain path;
+
+    private final Pose startPose = new Pose(10.0, 40, 90);
+
+    /**
+     * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
+     * initializes the FTC Dashboard telemetry.
+     */
+    @Override
+    public void init() {
+        follower = new Follower(hardwareMap);
+
+        follower.setMaxPower(.4);
+
+        follower.setStartingPose(startPose);
+
+        path = follower.pathBuilder()
+                /*
+                * Only update this path
+                 */
+                .addPath(
+                        // Line 1
+                        new BezierCurve(
+                                new Point(9.757, 84.983, Point.CARTESIAN),
+                                new Point(33.000, 105.000, Point.CARTESIAN),
+                                new Point(80.000, 118.000, Point.CARTESIAN),
+                                new Point(55.000, 120.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 2
+                        new BezierCurve(
+                                new Point(55.000, 120.000, Point.CARTESIAN),
+                                new Point(22.000, 106.000, Point.CARTESIAN),
+                                new Point(11.000, 131.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 3
+                        new BezierCurve(
+                                new Point(11.000, 131.000, Point.CARTESIAN),
+                                new Point(75.000, 95.000, Point.CARTESIAN),
+                                new Point(112.000, 132.000, Point.CARTESIAN),
+                                new Point(61.000, 131.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 4
+                        new BezierLine(
+                                new Point(61.000, 131.000, Point.CARTESIAN),
+                                new Point(11.000, 131.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 5
+                        new BezierCurve(
+                                new Point(11.000, 131.000, Point.CARTESIAN),
+                                new Point(100.000, 118.000, Point.CARTESIAN),
+                                new Point(103.000, 135.000, Point.CARTESIAN),
+                                new Point(61.000, 135.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 6
+                        new BezierLine(
+                                new Point(61.000, 135.000, Point.CARTESIAN),
+                                new Point(11.000, 131.000, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 7
+                        new BezierCurve(
+                                new Point(11.000, 131.000, Point.CARTESIAN),
+                                new Point(113.000, 95.000, Point.CARTESIAN),
+                                new Point(67.000, 95.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90)).build();
+                /*
+                * End of only update this path
+                 */
+
+        follower.followPath(path);
+
+        telemetryA = new MultipleTelemetry(this.telemetry, FtcDashboard.getInstance().getTelemetry());
+        telemetryA.update();
+    }
+
+    /**
+     * This runs the OpMode, updating the Follower as well as printing out the debug statements to
+     * the Telemetry, as well as the FTC Dashboard.
+     */
+    @Override
+    public void loop() {
+        follower.update();
+        if (follower.atParametricEnd()) {
+            follower.followPath(path);
+        }
+        follower.telemetryDebug(telemetryA);
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/AutoExample.java

@@ -0,0 +1,81 @@
+package org.firstinspires.ftc.teamcode.cometbots.poc;
+
+import com.acmerobotics.dashboard.FtcDashboard;
+import com.acmerobotics.dashboard.config.Config;
+import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
+import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierLine;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.PathChain;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
+
+/**
+ * This is the Circle autonomous OpMode. It runs the robot in a PathChain that's actually not quite
+ * a circle, but some Bezier curves that have control points set essentially in a square. However,
+ * it turns enough to tune your centripetal force correction and some of your heading. Some lag in
+ * heading is to be expected.
+ *
+ * @author Anyi Lin - 10158 Scott's Bots
+ * @author Aaron Yang - 10158 Scott's Bots
+ * @author Harrison Womack - 10158 Scott's Bots
+ * @version 1.0, 3/12/2024
+ */
+@Config
+@Disabled
+@Autonomous(name = "AutoExample - Straight Path", group = "Autonomous Pathing Tuning")
+public class AutoExample extends OpMode {
+    private Telemetry telemetryA;
+
+    private Follower follower;
+
+    private PathChain path;
+
+    private final Pose startPose = new Pose(0.0, 20.0, 0);
+
+    /**
+     * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
+     * initializes the FTC Dashboard telemetry.
+     */
+    @Override
+    public void init() {
+        follower = new Follower(hardwareMap);
+
+        follower.setMaxPower(.6);
+
+        follower.setStartingPose(startPose);
+
+        path = follower.pathBuilder()
+                .addPath(
+                        // Line 1
+                        new BezierLine(
+                                new Point(0.000, 20.000, Point.CARTESIAN),
+                                new Point(50.000, 20.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .build();
+
+        follower.followPath(path);
+
+        telemetryA = new MultipleTelemetry(this.telemetry, FtcDashboard.getInstance().getTelemetry());
+        telemetryA.update();
+    }
+
+    /**
+     * This runs the OpMode, updating the Follower as well as printing out the debug statements to
+     * the Telemetry, as well as the FTC Dashboard.
+     */
+    @Override
+    public void loop() {
+        follower.update();
+        if (follower.atParametricEnd()) {
+            follower.followPath(path);
+        }
+        follower.telemetryDebug(telemetryA);
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/AutoExampleFour.java

@@ -1,17 +1,11 @@
-package org.firstinspires.ftc.teamcode;
+package org.firstinspires.ftc.teamcode.cometbots.poc;
-
-import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_LEFT_MOTOR;
-import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_RIGHT_MOTOR;
-import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_LEFT_MOTOR;
-import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_RIGHT_MOTOR;
 
 import com.acmerobotics.dashboard.FtcDashboard;
 import com.acmerobotics.dashboard.config.Config;
 import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
 import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
 import com.qualcomm.robotcore.eventloop.opmode.OpMode;
-import com.qualcomm.robotcore.hardware.DcMotor;
-import com.qualcomm.robotcore.hardware.DcMotorEx;
 
 import org.firstinspires.ftc.robotcore.external.Telemetry;
 import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
@@ -33,15 +27,16 @@ import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
  * @version 1.0, 3/12/2024
  */
 @Config
-@Autonomous(name = "AutoExample", group = "Autonomous Pathing Tuning")
+@Disabled
-public class AutoExample extends OpMode {
+@Autonomous(name = "AutoExample - 2 Curves/2 Lines", group = "Autonomous Pathing Tuning")
+public class AutoExampleFour extends OpMode {
     private Telemetry telemetryA;
 
     private Follower follower;
 
     private PathChain path;
 
-    private final Pose startPose = new Pose(12.0, 11, 90);
+    private final Pose startPose = new Pose(12,60, 0);
 
     /**
      * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
@@ -51,54 +46,45 @@ public class AutoExample extends OpMode {
     public void init() {
         follower = new Follower(hardwareMap);
 
-        follower.setMaxPower(.6);
+        follower.setMaxPower(.45);
 
         follower.setStartingPose(startPose);
 
         path = follower.pathBuilder()
                 .addPath(
                         // Line 1
-                        new BezierLine(
+                        new BezierCurve(
-                                new Point(12.804, 11.223, Point.CARTESIAN),
+                                new Point(12.000, 60.000, Point.CARTESIAN),
-                                new Point(12.804, 42.362, Point.CARTESIAN)
+                                new Point(60.000, 60.000, Point.CARTESIAN),
+                                new Point(60.000, 12.000, Point.CARTESIAN)
                         )
                 )
-                .setTangentHeadingInterpolation()
+                .setLinearHeadingInterpolation(Math.toRadians(0), Math.toRadians(-90))
                 .addPath(
                         // Line 2
-                        new BezierCurve(
+                        new BezierLine(
-                                new Point(12.804, 42.362, Point.CARTESIAN),
+                                new Point(60.000, 12.000, Point.CARTESIAN),
-                                new Point(11.381, 57.379, Point.CARTESIAN),
+                                new Point(40.000, 12.000, Point.CARTESIAN)
-                                new Point(31.614, 56.588, Point.CARTESIAN)
                         )
                 )
-                .setTangentHeadingInterpolation()
+                .setLinearHeadingInterpolation(Math.toRadians(-90), Math.toRadians(-90))
                 .addPath(
                         // Line 3
-                        new BezierLine(
+                        new BezierCurve(
-                                new Point(31.614, 56.588, Point.CARTESIAN),
+                                new Point(40.000, 12.000, Point.CARTESIAN),
-                                new Point(51.214, 56.746, Point.CARTESIAN)
+                                new Point(35.000, 35.000, Point.CARTESIAN),
+                                new Point(12.000, 35.000, Point.CARTESIAN)
                         )
                 )
-                .setTangentHeadingInterpolation()
+                .setLinearHeadingInterpolation(Math.toRadians(-90), Math.toRadians(-90))
                 .addPath(
                         // Line 4
-                        new BezierCurve(
+                        new BezierLine(
-                                new Point(51.214, 56.746, Point.CARTESIAN),
+                                new Point(12.000, 35.000, Point.CARTESIAN),
-                                new Point(64.334, 58.643, Point.CARTESIAN),
+                                new Point(12.000, 60.000, Point.CARTESIAN)
-                                new Point(61.172, 45.524, Point.CARTESIAN)
                         )
                 )
-                .setTangentHeadingInterpolation()
+                .setLinearHeadingInterpolation(Math.toRadians(-90), Math.toRadians(0))
-                .addPath(
-                        // Line 5
-                        new BezierCurve(
-                                new Point(61.172, 45.524, Point.CARTESIAN),
-                                new Point(36.198, 26.239, Point.CARTESIAN),
-                                new Point(19.759, 11.065, Point.CARTESIAN)
-                        )
-                )
-                .setTangentHeadingInterpolation()
                 .build();
 
         follower.followPath(path);

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/AutoExampleSeason2025V1.java

@@ -0,0 +1,144 @@
+package org.firstinspires.ftc.teamcode.cometbots.poc;
+
+import com.acmerobotics.dashboard.FtcDashboard;
+import com.acmerobotics.dashboard.config.Config;
+import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
+import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierLine;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.PathChain;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
+
+/**
+ * This is the Circle autonomous OpMode. It runs the robot in a PathChain that's actually not quite
+ * a circle, but some Bezier curves that have control points set essentially in a square. However,
+ * it turns enough to tune your centripetal force correction and some of your heading. Some lag in
+ * heading is to be expected.
+ *
+ * @author Anyi Lin - 10158 Scott's Bots
+ * @author Aaron Yang - 10158 Scott's Bots
+ * @author Harrison Womack - 10158 Scott's Bots
+ * @version 1.0, 3/12/2024
+ */
+@Config
+@Disabled
+@Autonomous(name = "AutoExampleSeason2025V1", group = "Autonomous Pathing Tuning")
+public class AutoExampleSeason2025V1 extends OpMode {
+    private Telemetry telemetryA;
+
+    private Follower follower;
+
+    private PathChain path;
+
+    private final Pose startPose = new Pose(15.0, 35, 90);
+
+    /**
+     * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
+     * initializes the FTC Dashboard telemetry.
+     */
+    @Override
+    public void init() {
+        follower = new Follower(hardwareMap);
+
+        follower.setMaxPower(.375);
+
+        follower.setStartingPose(startPose);
+
+        path = follower.pathBuilder()
+                .addPath(
+                        // Line 1
+                        new BezierLine(
+                                new Point(15.000, 35.000, Point.CARTESIAN),
+                                new Point(60.000, 35.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 2
+                        new BezierLine(
+                                new Point(60.000, 35.000, Point.CARTESIAN),
+                                new Point(60.000, 25.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 3
+                        new BezierLine(
+                                new Point(60.000, 25.000, Point.CARTESIAN),
+                                new Point(15.000, 25.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 4
+                        new BezierLine(
+                                new Point(15.000, 25.000, Point.CARTESIAN),
+                                new Point(60.000, 25.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 5
+                        new BezierLine(
+                                new Point(60.000, 25.000, Point.CARTESIAN),
+                                new Point(60.000, 15.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 6
+                        new BezierLine(
+                                new Point(60.000, 15.000, Point.CARTESIAN),
+                                new Point(15.000, 15.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 7
+                        new BezierLine(
+                                new Point(15.000, 15.000, Point.CARTESIAN),
+                                new Point(60.000, 15.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 8
+                        new BezierLine(
+                                new Point(60.000, 15.000, Point.CARTESIAN),
+                                new Point(60.000, 8.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 9
+                        new BezierLine(
+                                new Point(60.000, 8.000, Point.CARTESIAN),
+                                new Point(15.000, 8.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90)).build();
+
+        follower.followPath(path);
+
+        telemetryA = new MultipleTelemetry(this.telemetry, FtcDashboard.getInstance().getTelemetry());
+        telemetryA.update();
+    }
+
+    /**
+     * This runs the OpMode, updating the Follower as well as printing out the debug statements to
+     * the Telemetry, as well as the FTC Dashboard.
+     */
+    @Override
+    public void loop() {
+        follower.update();
+        if (follower.atParametricEnd()) {
+            follower.followPath(path);
+        }
+        follower.telemetryDebug(telemetryA);
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/AutoExampleThree.java

@@ -0,0 +1,91 @@
+package org.firstinspires.ftc.teamcode.cometbots.poc;
+
+import com.acmerobotics.dashboard.FtcDashboard;
+import com.acmerobotics.dashboard.config.Config;
+import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
+import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierCurve;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierLine;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.PathChain;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
+
+/**
+ * This is the Circle autonomous OpMode. It runs the robot in a PathChain that's actually not quite
+ * a circle, but some Bezier curves that have control points set essentially in a square. However,
+ * it turns enough to tune your centripetal force correction and some of your heading. Some lag in
+ * heading is to be expected.
+ *
+ * @author Anyi Lin - 10158 Scott's Bots
+ * @author Aaron Yang - 10158 Scott's Bots
+ * @author Harrison Womack - 10158 Scott's Bots
+ * @version 1.0, 3/12/2024
+ */
+@Config
+@Disabled
+@Autonomous(name = "AutoExample - Curve and Line", group = "Autonomous Pathing Tuning")
+public class AutoExampleThree extends OpMode {
+    private Telemetry telemetryA;
+
+    private Follower follower;
+
+    private PathChain path;
+
+    private final Pose startPose = new Pose(10,45, 0);
+
+    /**
+     * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
+     * initializes the FTC Dashboard telemetry.
+     */
+    @Override
+    public void init() {
+        follower = new Follower(hardwareMap);
+
+        follower.setMaxPower(.4);
+
+        follower.setStartingPose(startPose);
+
+        path = follower.pathBuilder()
+                .addPath(
+                        // Line 1
+                        new BezierCurve(
+                                new Point(10.000, 45.000, Point.CARTESIAN),
+                                new Point(45.000, 45.000, Point.CARTESIAN),
+                                new Point(50.000, 20.000, Point.CARTESIAN)
+                        )
+                )
+                .setLinearHeadingInterpolation(Math.toRadians(0), Math.toRadians(-90))
+                .addPath(
+                        // Line 2
+                        new BezierLine(
+                                new Point(50.000, 20.000, Point.CARTESIAN),
+                                new Point(10.000, 20.000, Point.CARTESIAN)
+                        )
+                )
+                .setLinearHeadingInterpolation(Math.toRadians(-90), Math.toRadians(-90))
+                .build();
+
+        follower.followPath(path);
+
+        telemetryA = new MultipleTelemetry(this.telemetry, FtcDashboard.getInstance().getTelemetry());
+        telemetryA.update();
+    }
+
+    /**
+     * This runs the OpMode, updating the Follower as well as printing out the debug statements to
+     * the Telemetry, as well as the FTC Dashboard.
+     */
+    @Override
+    public void loop() {
+        follower.update();
+        if (follower.atParametricEnd()) {
+            follower.followPath(path);
+        }
+        follower.telemetryDebug(telemetryA);
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/AutoExampleTwo.java

@@ -0,0 +1,82 @@
+package org.firstinspires.ftc.teamcode.cometbots.poc;
+
+import com.acmerobotics.dashboard.FtcDashboard;
+import com.acmerobotics.dashboard.config.Config;
+import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
+import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierCurve;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.PathChain;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
+
+/**
+ * This is the Circle autonomous OpMode. It runs the robot in a PathChain that's actually not quite
+ * a circle, but some Bezier curves that have control points set essentially in a square. However,
+ * it turns enough to tune your centripetal force correction and some of your heading. Some lag in
+ * heading is to be expected.
+ *
+ * @author Anyi Lin - 10158 Scott's Bots
+ * @author Aaron Yang - 10158 Scott's Bots
+ * @author Harrison Womack - 10158 Scott's Bots
+ * @version 1.0, 3/12/2024
+ */
+@Config
+@Disabled
+@Autonomous(name = "AutoExample - Simple Curve", group = "Autonomous Pathing Tuning")
+public class AutoExampleTwo extends OpMode {
+    private Telemetry telemetryA;
+
+    private Follower follower;
+
+    private PathChain path;
+
+    private final Pose startPose = new Pose(10.0, 45, 0);
+
+    /**
+     * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
+     * initializes the FTC Dashboard telemetry.
+     */
+    @Override
+    public void init() {
+        follower = new Follower(hardwareMap);
+
+        follower.setMaxPower(.4);
+
+        follower.setStartingPose(startPose);
+
+        path = follower.pathBuilder()
+                .addPath(
+                        // Line 1
+                        new BezierCurve(
+                                new Point(10.000, 45.000, Point.CARTESIAN),
+                                new Point(45.000, 45.000, Point.CARTESIAN),
+                                new Point(50.000, 20.000, Point.CARTESIAN)
+                        )
+                )
+                .setLinearHeadingInterpolation(Math.toRadians(0), Math.toRadians(-90))
+                .build();
+
+        follower.followPath(path);
+
+        telemetryA = new MultipleTelemetry(this.telemetry, FtcDashboard.getInstance().getTelemetry());
+        telemetryA.update();
+    }
+
+    /**
+     * This runs the OpMode, updating the Follower as well as printing out the debug statements to
+     * the Telemetry, as well as the FTC Dashboard.
+     */
+    @Override
+    public void loop() {
+        follower.update();
+        if (follower.atParametricEnd()) {
+            follower.followPath(path);
+        }
+        follower.telemetryDebug(telemetryA);
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/BasicOmniOpMode_Linear.java

@@ -27,7 +27,7 @@
  * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
 
-package org.firstinspires.ftc.teamcode;
+package org.firstinspires.ftc.teamcode.cometbots.poc;
 
 import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_ENCODER;
 import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_ENCODER_DIRECTION;
@@ -82,6 +82,7 @@ import org.firstinspires.ftc.teamcode.pedroPathing.localization.Encoder;
  */
 
 @TeleOp(name="Basic: Omni Linear OpMode", group="Linear OpMode")
+@Disabled
 public class BasicOmniOpMode_Linear extends LinearOpMode {
 
     // Declare OpMode members for each of the 4 motors.

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/BlueBasketAuto.java

@@ -0,0 +1,163 @@
+package org.firstinspires.ftc.teamcode.cometbots.poc;
+
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+import com.acmerobotics.dashboard.FtcDashboard;
+import com.acmerobotics.dashboard.config.Config;
+import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
+import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierCurve;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierLine;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.PathChain;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
+
+/**
+ * This is the Circle autonomous OpMode. It runs the robot in a PathChain that's actually not quite
+ * a circle, but some Bezier curves that have control points set essentially in a square. However,
+ * it turns enough to tune your centripetal force correction and some of your heading. Some lag in
+ * heading is to be expected.
+ *
+ * @author Anyi Lin - 10158 Scott's Bots
+ * @author Aaron Yang - 10158 Scott's Bots
+ * @author Harrison Womack - 10158 Scott's Bots
+ * @version 1.0, 3/12/2024
+ */
+@Config
+@Disabled
+@Autonomous(name = "BlueBasketAuto", group = "Autonomous Pathing Tuning")
+public class BlueBasketAuto extends OpMode {
+    private Telemetry telemetryA;
+
+    private Follower follower;
+
+    private PathChain path;
+
+    private final Pose startPose = new Pose(11.25, 95.75);
+
+    /**
+     * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
+     * initializes the FTC Dashboard telemetry.
+     */
+    @Override
+    public void init() {
+        follower = new Follower(hardwareMap);
+
+        follower.setMaxPower(.45);
+
+        follower.setStartingPose(startPose);
+
+        path = follower.pathBuilder()
+                .addPath(
+                        // Line 1
+                        new BezierLine(
+                                new Point(11.250, 95.750, Point.CARTESIAN),
+                                new Point(37.000, 108.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .addPath(
+                        // Line 2
+                        new BezierCurve(
+                                new Point(37.000, 108.000, Point.CARTESIAN),
+                                new Point(73.286, 111.536, Point.CARTESIAN),
+                                new Point(67.821, 120.536, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .addPath(
+                        // Line 3
+                        new BezierLine(
+                                new Point(67.821, 120.536, Point.CARTESIAN),
+                                new Point(28.000, 121.500, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .addPath(
+                        // Line 4
+                        new BezierLine(
+                                new Point(28.000, 121.500, Point.CARTESIAN),
+                                new Point(18.000, 130.179, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .addPath(
+                        // Line 5
+                        new BezierCurve(
+                                new Point(18.000, 130.179, Point.CARTESIAN),
+                                new Point(59.000, 102.500, Point.CARTESIAN),
+                                new Point(68.700, 130.500, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .addPath(
+                        // Line 6
+                        new BezierLine(
+                                new Point(68.700, 130.500, Point.CARTESIAN),
+                                new Point(18.000, 130.339, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .addPath(
+                        // Line 7
+                        new BezierCurve(
+                                new Point(18.000, 130.339, Point.CARTESIAN),
+                                new Point(49.018, 121.179, Point.CARTESIAN),
+                                new Point(63.804, 135.321, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .addPath(
+                        // Line 8
+                        new BezierLine(
+                                new Point(63.804, 135.321, Point.CARTESIAN),
+                                new Point(53.036, 135.161, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .addPath(
+                        // Line 9
+                        new BezierLine(
+                                new Point(53.036, 135.161, Point.CARTESIAN),
+                                new Point(18.643, 135.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(0))
+                .addPath(
+                        // Line 10
+                        new BezierLine(
+                                new Point(18.643, 135.000, Point.CARTESIAN),
+                                new Point(72.300, 97.400, Point.CARTESIAN)
+                        )
+                )
+                .addPath(
+                        // Line 9
+                        new BezierLine(
+                                new Point(18.643, 135.000, Point.CARTESIAN),
+                                new Point(83.250, 95.464, Point.CARTESIAN)
+                        )
+                )
+                .setLinearHeadingInterpolation(Math.toRadians(0), Math.toRadians(270)).build();
+        follower.followPath(path);
+
+        telemetryA = new MultipleTelemetry(this.telemetry, FtcDashboard.getInstance().getTelemetry());
+        telemetryA.update();
+    }
+
+    /**
+     * This runs the OpMode, updating the Follower as well as printing out the debug statements to
+     * the Telemetry, as well as the FTC Dashboard.
+     */
+    @Override
+    public void loop() {
+        follower.update();
+        if (follower.atParametricEnd()) {
+            follower.followPath(path);
+        }
+        follower.telemetryDebug(telemetryA);
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/poc/BluebAutoV1.java

@@ -0,0 +1,257 @@
+package org.firstinspires.ftc.teamcode.cometbots.poc;
+
+import com.acmerobotics.dashboard.FtcDashboard;
+import com.acmerobotics.dashboard.config.Config;
+import com.acmerobotics.dashboard.telemetry.MultipleTelemetry;
+import com.qualcomm.robotcore.eventloop.opmode.Autonomous;
+import com.qualcomm.robotcore.eventloop.opmode.Disabled;
+import com.qualcomm.robotcore.eventloop.opmode.OpMode;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierLine;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierPoint;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.PathChain;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
+
+/**
+ * This is the Circle autonomous OpMode. It runs the robot in a PathChain that's actually not quite
+ * a circle, but some Bezier curves that have control points set essentially in a square. However,
+ * it turns enough to tune your centripetal force correction and some of your heading. Some lag in
+ * heading is to be expected.
+ *
+ * @author Anyi Lin - 10158 Scott's Bots
+ * @author Aaron Yang - 10158 Scott's Bots
+ * @author Harrison Womack - 10158 Scott's Bots
+ * @version 1.0, 3/12/2024
+ */
+@Config
+@Disabled
+@Autonomous(name = "BluebAutoV1", group = "Autonomous Pathing Tuning")
+public class BluebAutoV1 extends OpMode {
+    private Telemetry telemetryA;
+
+    private Follower follower;
+
+    private PathChain path;
+
+    private final Pose startPose = new Pose(7.5, 72, 90);
+
+    /**
+     * This initializes the Follower and creates the PathChain for the "circle". Additionally, this
+     * initializes the FTC Dashboard telemetry.
+     */
+    @Override
+    public void init() {
+        follower = new Follower(hardwareMap);
+
+        follower.setMaxPower(.4);
+
+        follower.setStartingPose(startPose);
+
+        path = follower.pathBuilder()
+                .addPath(
+                        // Line 1
+                        new BezierLine(
+                                new Point(7.5, 72, Point.CARTESIAN),
+                                new Point(29.893, 38.250, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 2
+                        new BezierLine(
+                                new Point(29.893, 38.250, Point.CARTESIAN),
+                                new Point(65.250, 32.143, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 3
+                        new BezierLine(
+                                new Point(65.250, 32.143, Point.CARTESIAN),
+                                new Point(61.714, 24.429, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 4
+                        new BezierLine(
+                                new Point(61.714, 24.429, Point.CARTESIAN),
+                                new Point(13.821, 22.821, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 5
+                        new BezierLine(
+                                new Point(13.821, 22.821, Point.CARTESIAN),
+                                new Point(61.714, 24.429, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 6
+                        new BezierLine(
+                                new Point(61.714, 24.429, Point.CARTESIAN),
+                                new Point(60.750, 12.696, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 7
+                        new BezierLine(
+                                new Point(60.750, 12.696, Point.CARTESIAN),
+                                new Point(12.375, 13.179, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 8
+                        new BezierLine(
+                                new Point(12.375, 13.179, Point.CARTESIAN),
+                                new Point(60.750, 12.536, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 9
+                        new BezierLine(
+                                new Point(60.750, 12.536, Point.CARTESIAN),
+                                new Point(60.589, 9.321, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 10
+                        new BezierLine(
+                                new Point(60.589, 9.321, Point.CARTESIAN),
+                                new Point(12.536, 8.357, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 11
+                        new BezierLine(
+                                new Point(12.536, 8.357, Point.CARTESIAN),
+                                new Point(26.679, 8.679, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 12
+                        new BezierLine(
+                                new Point(26.679, 8.679, Point.CARTESIAN),
+                                new Point(22.821, 109.446, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 13
+                        new BezierLine(
+                                new Point(22.821, 109.446, Point.CARTESIAN),
+                                new Point(70.714, 109.446, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 14
+                        new BezierLine(
+                                new Point(70.714, 109.446, Point.CARTESIAN),
+                                new Point(71.036, 120.214, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 15
+                        new BezierLine(
+                                new Point(71.036, 120.214, Point.CARTESIAN),
+                                new Point(22.179, 120.214, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 16
+                        new BezierLine(
+                                new Point(22.179, 120.214, Point.CARTESIAN),
+                                new Point(11.089, 130.821, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 17
+                        new BezierLine(
+                                new Point(11.089, 130.821, Point.CARTESIAN),
+                                new Point(70.714, 112.018, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 18
+                        new BezierLine(
+                                new Point(70.714, 112.018, Point.CARTESIAN),
+                                new Point(70.714, 128.250, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 19
+                        new BezierLine(
+                                new Point(70.714, 128.250, Point.CARTESIAN),
+                                new Point(9.964, 130.018, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 20
+                        new BezierLine(
+                                new Point(9.964, 130.018, Point.CARTESIAN),
+                                new Point(70.554, 130.500, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 21
+                        new BezierLine(
+                                new Point(70.554, 130.500, Point.CARTESIAN),
+                                new Point(70.393, 135.000, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90))
+                .addPath(
+                        // Line 22
+                        new BezierLine(
+                                new Point(70.393, 135.000, Point.CARTESIAN),
+                                new Point(13.821, 134.839, Point.CARTESIAN)
+                        )
+                )
+                .setConstantHeadingInterpolation(Math.toRadians(90)).build();
+
+
+        follower.holdPoint(
+                new BezierPoint(
+                        new Point(13.821, 134.839, Point.CARTESIAN)
+                ),
+                90
+        );
+
+        follower.followPath(path);
+        telemetryA = new MultipleTelemetry(this.telemetry, FtcDashboard.getInstance().getTelemetry());
+        telemetryA.update();
+
+    }
+
+    /**
+     * This runs the OpMode, updating the Follower as well as printing out the debug statements to
+     * the Telemetry, as well as the FTC Dashboard.
+     */
+    @Override
+    public void loop() {
+        follower.update();
+        if (follower.atParametricEnd()) {
+            follower.followPath(path, true);
+        }
+        follower.telemetryDebug(telemetryA);
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/tests/ArmTest.java

@@ -0,0 +1,95 @@
+/* Copyright (c) 2021 FIRST. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided that
+ * the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Neither the name of FIRST nor the names of its contributors may be used to endorse or
+ * promote products derived from this software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS
+ * LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+package org.firstinspires.ftc.teamcode.cometbots.tests;
+
+import com.qualcomm.robotcore.eventloop.opmode.LinearOpMode;
+import com.qualcomm.robotcore.eventloop.opmode.TeleOp;
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.util.ElapsedTime;
+
+import org.firstinspires.ftc.teamcode.subsystem.ArmSubsystem;
+
+@TeleOp(name = "Arm Test", group = "Debug")
+public class ArmTest extends LinearOpMode {
+
+    // Declare OpMode members for each of the 4 motors.
+    private final ElapsedTime runtime = new ElapsedTime();
+
+    @Override
+    public void runOpMode() {
+
+        /*
+         * Instantiate Arm
+         */
+        ArmSubsystem arm = new ArmSubsystem(hardwareMap, telemetry);
+
+        /*
+         * Instantiate gamepad state holders
+         */
+        Gamepad currentGamepad1 = new Gamepad();
+        Gamepad previousGamepad1 = new Gamepad();
+
+        arm.init();
+        waitForStart();
+        runtime.reset();
+
+        // run until the end of the match (driver presses STOP)
+        while (opModeIsActive()) {
+
+            previousGamepad1.copy(currentGamepad1);
+            currentGamepad1.copy(gamepad1);
+
+            if (currentGamepad1.circle && !previousGamepad1.circle) {
+                arm.toParkPosition();
+            }
+
+            if (currentGamepad1.square && !previousGamepad1.square) {
+                arm.toBucketPosition();
+            }
+
+            if (currentGamepad1.cross && !previousGamepad1.cross) {
+                arm.switchState();
+            }
+
+            if (currentGamepad1.left_bumper && !previousGamepad1.left_bumper) {
+                arm.setPosition(arm.getPosition() - .05);
+            }
+
+            if (currentGamepad1.right_bumper && !previousGamepad1.right_bumper) {
+                arm.setPosition(arm.getPosition() + .05);
+            }
+
+            telemetry.addData("Status", "Run Time: " + runtime.toString());
+            telemetry.addData("Arm State", arm.getState());
+            telemetry.addData("Arm Position", arm.getPosition());
+            telemetry.update();
+        }
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/tests/ClawTest.java

@@ -0,0 +1,78 @@
+/* Copyright (c) 2021 FIRST. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided that
+ * the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Neither the name of FIRST nor the names of its contributors may be used to endorse or
+ * promote products derived from this software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS
+ * LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+package org.firstinspires.ftc.teamcode.cometbots.tests;
+
+import com.qualcomm.robotcore.eventloop.opmode.LinearOpMode;
+import com.qualcomm.robotcore.eventloop.opmode.TeleOp;
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.util.ElapsedTime;
+
+import org.firstinspires.ftc.teamcode.subsystem.ClawSubsystem;
+
+@TeleOp(name = "Claw Test", group = "Debug")
+public class ClawTest extends LinearOpMode {
+
+    // Declare OpMode members for each of the 4 motors.
+    private final ElapsedTime runtime = new ElapsedTime();
+
+    @Override
+    public void runOpMode() {
+
+        /*
+         * Instantiate Claw
+         */
+        ClawSubsystem claw = new ClawSubsystem(hardwareMap, telemetry);
+
+        /*
+         * Instantiate gamepad state holders
+         */
+        Gamepad currentGamepad1 = new Gamepad();
+        Gamepad previousGamepad1 = new Gamepad();
+
+        waitForStart();
+        runtime.reset();
+
+        // run until the end of the match (driver presses STOP)
+        while (opModeIsActive()) {
+
+            previousGamepad1.copy(currentGamepad1);
+            currentGamepad1.copy(gamepad1);
+
+            if (currentGamepad1.cross && !previousGamepad1.cross) {
+                claw.switchState();
+            }
+
+            // Show the elapsed game time and wheel power.
+            telemetry.addData("Status", "Run Time: " + runtime.toString());
+            telemetry.addData("Claw State", claw.getState());
+            telemetry.update();
+        }
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/tests/LiftTest.java

@@ -0,0 +1,100 @@
+/* Copyright (c) 2021 FIRST. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided that
+ * the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Neither the name of FIRST nor the names of its contributors may be used to endorse or
+ * promote products derived from this software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS
+ * LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+package org.firstinspires.ftc.teamcode.cometbots.tests;
+
+import com.acmerobotics.roadrunner.ftc.Actions;
+import com.qualcomm.robotcore.eventloop.opmode.LinearOpMode;
+import com.qualcomm.robotcore.eventloop.opmode.TeleOp;
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.util.ElapsedTime;
+
+import org.firstinspires.ftc.teamcode.subsystem.LiftActionsSubsystem;
+
+@TeleOp(name = "Lift Test", group = "Debug")
+public class LiftTest extends LinearOpMode {
+
+    private final ElapsedTime runtime = new ElapsedTime();
+
+    @Override
+    public void runOpMode() {
+
+        /*
+         * Instantiate Lift
+         */
+        LiftActionsSubsystem lift = new LiftActionsSubsystem(hardwareMap);
+
+        /*
+         * Instantiate gamepad state holders
+         */
+        Gamepad currentGamepad1 = new Gamepad();
+        Gamepad previousGamepad1 = new Gamepad();
+
+        lift.init();
+        waitForStart();
+        runtime.reset();
+
+
+        // run until the end of the match (driver presses STOP)
+        while (opModeIsActive()) {
+
+            previousGamepad1.copy(currentGamepad1);
+            currentGamepad1.copy(gamepad1);
+
+            if (currentGamepad1.square && !previousGamepad1.square) {
+                Actions.runBlocking(lift.toFloorPosition());
+            }
+
+            if (currentGamepad1.triangle && !previousGamepad1.triangle) {
+                Actions.runBlocking(lift.toHighBucketPosition());
+            }
+
+            if (currentGamepad1.circle && !previousGamepad1.circle) {
+                Actions.runBlocking(lift.toLowBucketPosition());
+            }
+
+            if (currentGamepad1.cross && !previousGamepad1.cross) {
+                lift.switchState();
+            }
+
+            if (currentGamepad1.right_bumper && !previousGamepad1.right_bumper) {
+                lift.setPosition(lift.getPosition() + 25);
+            }
+
+            if (currentGamepad1.left_bumper && !previousGamepad1.left_bumper) {
+                lift.setPosition(lift.getPosition() - 25);
+            }
+
+            // Show the elapsed game time and wheel power.
+            telemetry.addData("Status", "Run Time: " + runtime.toString());
+            telemetry.addData("Lift Drive Position", lift.getPosition());
+            telemetry.update();
+        }
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/tests/LiftWristArmTest.java

@@ -0,0 +1,108 @@
+/* Copyright (c) 2021 FIRST. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided that
+ * the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Neither the name of FIRST nor the names of its contributors may be used to endorse or
+ * promote products derived from this software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS
+ * LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+package org.firstinspires.ftc.teamcode.cometbots.tests;
+
+import com.qualcomm.robotcore.eventloop.opmode.LinearOpMode;
+import com.qualcomm.robotcore.eventloop.opmode.TeleOp;
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.util.ElapsedTime;
+
+import org.firstinspires.ftc.teamcode.subsystem.ArmActionsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.LiftActionsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.WristActionsSubsystem;
+
+@TeleOp(name = "Lift Wrist Arm Test", group = "Debug")
+public class LiftWristArmTest extends LinearOpMode {
+
+    private final ElapsedTime runtime = new ElapsedTime();
+
+    @Override
+    public void runOpMode() {
+
+        /*
+         * Instantiate Lift
+         */
+        LiftActionsSubsystem lift = new LiftActionsSubsystem(hardwareMap);
+        WristActionsSubsystem wrist = new WristActionsSubsystem(hardwareMap);
+        ArmActionsSubsystem arm = new ArmActionsSubsystem(hardwareMap);
+
+        /*
+         * Instantiate gamepad state holders
+         */
+        Gamepad currentGamepad1 = new Gamepad();
+        Gamepad previousGamepad1 = new Gamepad();
+
+        lift.init();
+        wrist.init();
+        arm.init();
+        waitForStart();
+        runtime.reset();
+
+
+        // run until the end of the match (driver presses STOP)
+        while (opModeIsActive()) {
+
+            previousGamepad1.copy(currentGamepad1);
+            currentGamepad1.copy(gamepad1);
+
+            if (currentGamepad1.dpad_up && !previousGamepad1.dpad_up) {
+                arm.setPosition(arm.getPosition() + .05);
+            }
+
+            if (currentGamepad1.dpad_down && !previousGamepad1.dpad_down) {
+                arm.setPosition(arm.getPosition() - .05);
+            }
+
+            if (currentGamepad1.triangle && !previousGamepad1.triangle) {
+                wrist.setPosition(wrist.getPosition() + .05);
+            }
+
+            if (currentGamepad1.cross && !previousGamepad1.cross) {
+                wrist.setPosition(wrist.getPosition() - .05);
+            }
+
+            if (currentGamepad1.right_bumper && !previousGamepad1.right_bumper) {
+                lift.setPosition(lift.getPosition() + 175);
+            }
+
+            if (currentGamepad1.left_bumper && !previousGamepad1.left_bumper) {
+                lift.setPosition(lift.getPosition() - 25);
+            }
+
+            // Show the elapsed game time and wheel power.
+            telemetry.addData("Status", "Run Time: " + runtime.toString());
+            telemetry.addData("Lift Drive Position", lift.getPosition());
+            telemetry.addData("Wrist Position", wrist.getPosition());
+            telemetry.addData("Arm Position", arm.getPosition());
+
+            telemetry.update();
+        }
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/cometbots/tests/WristTest.java

@@ -0,0 +1,98 @@
+/* Copyright (c) 2021 FIRST. All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without modification,
+ * are permitted (subject to the limitations in the disclaimer below) provided that
+ * the following conditions are met:
+ *
+ * Redistributions of source code must retain the above copyright notice, this list
+ * of conditions and the following disclaimer.
+ *
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ * list of conditions and the following disclaimer in the documentation and/or
+ * other materials provided with the distribution.
+ *
+ * Neither the name of FIRST nor the names of its contributors may be used to endorse or
+ * promote products derived from this software without specific prior written permission.
+ *
+ * NO EXPRESS OR IMPLIED LICENSES TO ANY PARTY'S PATENT RIGHTS ARE GRANTED BY THIS
+ * LICENSE. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO,
+ * THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE LIABLE
+ * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
+ * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
+ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+package org.firstinspires.ftc.teamcode.cometbots.tests;
+
+import com.acmerobotics.roadrunner.ftc.Actions;
+import com.qualcomm.robotcore.eventloop.opmode.LinearOpMode;
+import com.qualcomm.robotcore.eventloop.opmode.TeleOp;
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.util.ElapsedTime;
+
+import org.firstinspires.ftc.teamcode.subsystem.WristActionsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.WristSubsystem;
+
+@TeleOp(name = "Wrist Test", group = "Debug")
+public class WristTest extends LinearOpMode {
+
+    // Declare OpMode members for each of the 4 motors.
+    private final ElapsedTime runtime = new ElapsedTime();
+
+    @Override
+    public void runOpMode() {
+
+        /*
+         * Instantiate Wrist
+         */
+        WristActionsSubsystem wrist = new WristActionsSubsystem(hardwareMap);
+
+        /*
+         * Instantiate gamepad state holders
+         */
+        Gamepad currentGamepad1 = new Gamepad();
+        Gamepad previousGamepad1 = new Gamepad();
+
+        wrist.init();
+        waitForStart();
+        runtime.reset();
+
+        // run until the end of the match (driver presses STOP)
+        while (opModeIsActive()) {
+
+            previousGamepad1.copy(currentGamepad1);
+            currentGamepad1.copy(gamepad1);
+
+            if (currentGamepad1.square && !previousGamepad1.square) {
+                Actions.runBlocking(wrist.toBucketPosition());
+            }
+
+            if (currentGamepad1.circle && !previousGamepad1.circle) {
+                Actions.runBlocking(wrist.toFloorPosition());
+            }
+
+            if (currentGamepad1.cross && !previousGamepad1.cross) {
+                wrist.switchState();
+            }
+
+            if (currentGamepad1.left_bumper && !previousGamepad1.left_bumper) {
+                wrist.setPosition(wrist.getPosition() - .05);
+            }
+
+            if (currentGamepad1.right_bumper && !previousGamepad1.right_bumper) {
+                wrist.setPosition(wrist.getPosition() + .05);
+            }
+
+            // Show the elapsed game time and wheel power.
+            telemetry.addData("Status", "Run Time: " + runtime.toString());
+            telemetry.addData("Wrist State", wrist.getState());
+            telemetry.addData("Wrist Position", wrist.getPosition());
+            telemetry.update();
+        }
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/configs/RobotConstants.java

@@ -0,0 +1,23 @@
+package org.firstinspires.ftc.teamcode.configs;
+
+import com.acmerobotics.dashboard.config.Config;
+
+@Config
+public class RobotConstants {
+    public final static double clawClose = 1.00;
+    public final static double clawOpen = 0.05;
+
+    public final static double armFloor = 0.45;
+    public final static double armSubmarine = 0.375;
+    public final static double armPark = 0.0;
+    public final static double armBucket = 0.15;
+
+    public final static double wristFloor = 0.7;
+    public final static double wristBucket = 0.35;
+
+    public final static int liftToFloorPos = 0;
+    public final static int liftToSubmarinePos = 250;
+    public final static int liftToLowBucketPos = 2250;
+    public final static int liftToHighBucketPos = 3850;
+    public final static double liftPower = .625;
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/pedroPathing/TUNING.md

@@ -71,8 +71,9 @@ measurements will be in centimeters.
   of how fast your robot will coast to a stop. Honestly, this is up to you. I personally used 4, but
   what works best for you is most important. Higher numbers will cause a faster brake, but increase
   oscillations at the end. Lower numbers will do the opposite. This can be found on line `107` in
-  `FollowerConstants`, named `zeroPowerAccelerationMultiplier`. The drive PID is much, much more 
+  `FollowerConstants`, named `zeroPowerAccelerationMultiplier`. 
-* sensitive than the others. For reference,
+
+* The drive PID is much, much more sensitive than the others. For reference,
   my P values were in the hundredths and thousandths place values, and my D values were in the hundred
   thousandths and millionths place values. To tune this, enable `useDrive`, `useHeading`, and
   `useTranslational` in the `Follower` dropdown in FTC Dashboard. Next, run `StraightBackAndForth`

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/pedroPathing/tuning/FollowerConstants.java

@@ -60,8 +60,8 @@ public class FollowerConstants {
     public static CustomPIDFCoefficients headingPIDFCoefficients = new CustomPIDFCoefficients(
             2,
             0,
-            .075,
+            .025,
-            -.03125);
+            0);
 
     // Feed forward constant added on to the heading PIDF
     public static double headingPIDFFeedForward = 0.01;
@@ -81,7 +81,7 @@ public class FollowerConstants {
     // Kalman filter parameters for the drive error Kalman filter
     public static KalmanFilterParameters driveKalmanFilterParameters = new KalmanFilterParameters(
             6,
-            1);
+            3);
 
 
     // Mass of robot in kilograms

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/runmodes/Auto.java

@@ -0,0 +1,114 @@
+package org.firstinspires.ftc.teamcode.runmodes;
+
+import com.qualcomm.robotcore.hardware.HardwareMap;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierCurve;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.BezierLine;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Path;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.pedroPathing.pathGeneration.Point;
+import org.firstinspires.ftc.teamcode.pedroPathing.util.Timer;
+import org.firstinspires.ftc.teamcode.subsystem.ArmSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.ClawSubsystem;
+import static org.firstinspires.ftc.teamcode.util.action.FieldConstants.*;
+
+import org.firstinspires.ftc.teamcode.subsystem.WristSubsystem;
+import org.firstinspires.ftc.teamcode.util.action.Action;
+import org.firstinspires.ftc.teamcode.util.action.RunAction;
+import org.firstinspires.ftc.teamcode.util.action.SequentialAction;
+import org.firstinspires.ftc.teamcode.util.action.SleepAction;
+
+public class Auto {
+
+    public ClawSubsystem claw;
+    public ArmSubsystem arm;
+    public WristSubsystem wrist;
+
+    public Timer clawTimer = new Timer();
+    public Timer armTimer = new Timer();
+    public Timer wristTimer = new Timer();
+
+    public Follower follower;
+    public Telemetry telemetry;
+
+    public int caseState = 1;
+
+    public Auto(HardwareMap hardwareMap, Telemetry telemetry, Follower follower) {
+        claw = new ClawSubsystem(hardwareMap, telemetry);
+        arm = new ArmSubsystem(hardwareMap, telemetry);
+        wrist = new WristSubsystem(hardwareMap, telemetry);
+
+        this.follower = follower;
+        this.telemetry = telemetry;
+
+        init();
+    }
+
+    public void init() {
+        claw.init();
+        arm.init();
+        wrist.init();
+    }
+
+    public void start() {
+        clawTimer.resetTimer();
+        armTimer.resetTimer();
+        wristTimer.resetTimer();
+
+        claw.start();
+        arm.start();
+        wrist.start();
+    }
+
+    public void update() {
+
+        this.telemetry.addData("Current State", caseState);
+        this.telemetry.addData("Claw Timer", clawTimer.getElapsedTimeSeconds());
+        this.telemetry.addData("Arm Timer", armTimer.getElapsedTimeSeconds());
+        this.telemetry.addData("Wrist Timer", wristTimer.getElapsedTimeSeconds());
+        this.telemetry.update();
+
+        switch(caseState) {
+            case 1:
+                claw.openClaw();
+                caseState = 2;
+                break;
+            case 2:
+                if (clawTimer.getElapsedTimeSeconds() > 2) {
+                    arm.toFloorPosition();
+                    caseState = 3;
+                }
+                break;
+            case 3:
+                if (armTimer.getElapsedTimeSeconds() > 4) {
+                    wrist.toFloorPosition();
+                    caseState = 4;
+                }
+                break;
+            case 4:
+                if (clawTimer.getElapsedTimeSeconds() > 6) {
+                    claw.closeClaw();
+                    caseState = 5;
+                }
+                break;
+            case 5:
+                if (armTimer.getElapsedTimeSeconds() > 8) {
+                    arm.toBucketPosition();
+                    wrist.toBucketPosition();
+                    caseState = 6;
+                }
+                break;
+            case 6:
+                if (clawTimer.getElapsedTimeSeconds() > 10) {
+                    claw.openClaw();
+                    caseState = 7;
+                }
+                break;
+            case 7:
+                this.init();
+                break;
+        }
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/runmodes/CometBotTeleopCompetition.java

@@ -0,0 +1,185 @@
+package org.firstinspires.ftc.teamcode.runmodes;
+
+import com.acmerobotics.roadrunner.SequentialAction;
+import com.acmerobotics.roadrunner.SleepAction;
+import com.acmerobotics.roadrunner.ftc.Actions;
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.states.FieldStates;
+import org.firstinspires.ftc.teamcode.subsystem.ArmActionsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.ClawActionsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.LiftActionsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.MotorsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.WristActionsSubsystem;
+
+public class CometBotTeleopCompetition {
+
+    /*
+    Subsystems
+     */
+    private MotorsSubsystem motors;
+    public ClawActionsSubsystem claw;
+    public ArmActionsSubsystem arm;
+    public WristActionsSubsystem wrist;
+    public LiftActionsSubsystem lift;
+
+    /*
+    Controllers
+     */
+    public Gamepad GP1;
+    public Gamepad GP2;
+    public Gamepad currentGP1;
+    public Gamepad previousGP1;
+    public Gamepad currentGP2;
+    public Gamepad previousGP2;
+    private Telemetry telemetry;
+    public FieldStates fieldStates;
+
+    private Follower follower;
+
+    public CometBotTeleopCompetition(HardwareMap hardwareMap, Telemetry telemetry, Gamepad gp1, Gamepad gp2) {
+        this.motors = new MotorsSubsystem(hardwareMap, telemetry, .55);
+        this.claw = new ClawActionsSubsystem(hardwareMap);
+        this.arm = new ArmActionsSubsystem(hardwareMap);
+        this.wrist = new WristActionsSubsystem(hardwareMap);
+        this.lift = new LiftActionsSubsystem(hardwareMap);
+        this.GP1 = gp1;
+        this.GP2 = gp2;
+        this.telemetry = telemetry;
+        this.currentGP1 = new Gamepad();
+        this.currentGP2 = new Gamepad();
+        this.previousGP1 = new Gamepad();
+        this.previousGP2 = new Gamepad();
+        this.fieldStates = new FieldStates();
+        this.follower = new Follower(hardwareMap);
+    }
+
+    public void init() {
+        this.motors.init();
+        this.claw.init();
+        this.arm.init();
+        this.wrist.init();
+        this.lift.init();
+        this.fieldStates.setFieldLocation(FieldStates.FieldLocation.TRAVELING);
+        follower.setMaxPower(.75);
+        follower.startTeleopDrive();
+    }
+
+    public void update() {
+        this.previousGP1.copy(currentGP1);
+        this.currentGP1.copy(this.GP1);
+        this.previousGP2.copy(currentGP2);
+        this.currentGP2.copy(this.GP2);
+
+        this.toHighBucketScore();
+        this.toLowBucketScore();
+        this.toArmParkPosition();
+        this.toArmParkThenSwitchBetweenSubmarineAndFloorPosition();
+        this.clawControl();
+
+//        this.motors.calculateTrajectory(this.GP1);
+        follower.setTeleOpMovementVectors(-this.GP1.left_stick_y, -this.GP1.left_stick_x, -this.GP1.right_stick_x);
+        follower.update();
+        this.telemetry.addData("Field State", this.fieldStates.getFieldLocation());
+        this.telemetry.addData("Claw State", this.claw.getState());
+        this.telemetry.addData("Claw Position", this.claw.getPosition());
+        this.telemetry.addData("Wrist State", this.wrist.getState());
+        this.telemetry.addData("Arm State", this.arm.getState());
+        this.telemetry.addData("Lift State", this.lift.getState());
+        this.telemetry.addData("Lift Position", this.lift.getPosition());
+    }
+
+    /*
+    Controller: 1
+    Button: A
+    Action: On button press, Arm hovers the floor with wrist parallel to arm
+     */
+    public void toHighBucketScore() {
+        if (this.currentGP1.triangle && !this.previousGP1.triangle) {
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.BUCKET);
+            Actions.runBlocking(new SequentialAction(
+                    this.wrist.toFloorPosition(),
+                    this.arm.toParkPosition(),
+                    this.lift.toHighBucketPosition(),
+                    new SleepAction(.5),
+                    this.arm.toBucketPosition(),
+                    new SleepAction(.5),
+                    this.wrist.toBucketPosition(),
+                    new SleepAction(.5),
+                    this.claw.openClaw(),
+                    new SleepAction(.5),
+                    this.wrist.toFloorPosition(),
+                    new SleepAction(.5),
+                    this.arm.toParkPosition(),
+                    this.lift.toFloorPosition()
+            ));
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.TRAVELING);
+        }
+    }
+
+    public void toLowBucketScore() {
+        if (this.currentGP1.circle && !this.previousGP1.circle) {
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.BUCKET);
+            Actions.runBlocking(new SequentialAction(
+                    this.wrist.toFloorPosition(),
+                    this.arm.toParkPosition(),
+                    this.lift.toLowBucketPosition(),
+                    new SleepAction(.5),
+                    this.arm.toBucketPosition(),
+                    new SleepAction(.5),
+                    this.wrist.toBucketPosition(),
+                    new SleepAction(.5),
+                    this.claw.openClaw(),
+                    new SleepAction(.5),
+                    this.wrist.toFloorPosition(),
+                    new SleepAction(.5),
+                    this.arm.toParkPosition(),
+                    this.lift.toFloorPosition()
+            ));
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.TRAVELING);
+        }
+    }
+
+    public void clawControl() {
+        if (this.currentGP1.right_bumper && !this.previousGP1.right_bumper) {
+            this.claw.switchState();
+        }
+    }
+
+    public void toArmParkPosition() {
+        if (this.currentGP1.square && !this.previousGP1.square) {
+            Actions.runBlocking(this.arm.toParkPosition());
+        }
+    }
+
+    public void toArmParkThenSwitchBetweenSubmarineAndFloorPosition() {
+        if (this.currentGP1.cross && !previousGP1.cross) {
+            if (this.arm.getState() == ArmActionsSubsystem.ArmState.PARK) {
+                Actions.runBlocking(
+                        new SequentialAction(
+                                this.arm.toSubmarinePosition(),
+                                this.wrist.toFloorPosition()
+                        )
+                );
+            } else if (this.arm.getState() == ArmActionsSubsystem.ArmState.SUBMARINE) {
+                Actions.runBlocking(
+                        new SequentialAction(
+                                this.arm.toFloorPosition(),
+                                this.wrist.toFloorPosition()
+                        )
+                );
+            } else if (this.arm.getState() == ArmActionsSubsystem.ArmState.FLOOR) {
+                Actions.runBlocking(
+                        new SequentialAction(
+                                this.arm.toSubmarinePosition(),
+                                this.wrist.toFloorPosition()
+                        )
+                );
+            }
+        }
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/runmodes/DevTeleopRunMode.java

@@ -0,0 +1,182 @@
+package org.firstinspires.ftc.teamcode.runmodes;
+
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.states.FieldStates;
+import org.firstinspires.ftc.teamcode.subsystem.ArmSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.ClawSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.LiftSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.MotorsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.WristSubsystem;
+import org.firstinspires.ftc.teamcode.util.action.Actions;
+import org.firstinspires.ftc.teamcode.util.action.SequentialAction;
+import org.firstinspires.ftc.teamcode.util.action.SleepAction;
+
+public class DevTeleopRunMode {
+
+    /*
+    Subsystems
+     */
+    private MotorsSubsystem motors;
+    public ClawSubsystem claw;
+    public ArmSubsystem arm;
+    public WristSubsystem wrist;
+    public LiftSubsystem lift;
+
+    /*
+    Controllers
+     */
+    public Gamepad GP1;
+    public Gamepad GP2;
+    public Gamepad currentGP1;
+    public Gamepad previousGP1;
+    public Gamepad currentGP2;
+    public Gamepad previousGP2;
+    private Telemetry telemetry;
+    public FieldStates fieldStates;
+
+    public DevTeleopRunMode(HardwareMap hardwareMap, Telemetry telemetry, Gamepad gp1, Gamepad gp2) {
+        this.motors = new MotorsSubsystem(hardwareMap, telemetry, .55);
+        this.claw = new ClawSubsystem(hardwareMap, telemetry);
+        this.arm = new ArmSubsystem(hardwareMap, telemetry);
+        this.wrist = new WristSubsystem(hardwareMap, telemetry);
+        this.lift = new LiftSubsystem(hardwareMap, telemetry);
+        this.GP1 = gp1;
+        this.GP2 = gp2;
+        this.telemetry = telemetry;
+        this.currentGP1 = new Gamepad();
+        this.currentGP2 = new Gamepad();
+        this.previousGP1 = new Gamepad();
+        this.previousGP2 = new Gamepad();
+        this.fieldStates = new FieldStates();
+    }
+
+    public void init() {
+        this.motors.init();
+        this.claw.init();
+        this.arm.init();
+        this.wrist.init();
+        this.lift.init();
+    }
+
+    public void update() {
+        this.previousGP1.copy(currentGP1);
+        this.currentGP1.copy(this.GP1);
+        this.previousGP2.copy(currentGP2);
+        this.currentGP2.copy(this.GP2);
+        this.toTravelfromField();
+        this.thePickup();
+        this.toFieldFromBucketScore();
+        this.toLowBucketScore();
+        this.toHighBucketScore();
+        this.toHold();
+        this.motors.calculateTrajectory(this.GP1);
+        this.telemetry.addData("Field State", this.fieldStates.getFieldLocation());
+        this.telemetry.addData("Claw State", this.claw.getState());
+        this.telemetry.addData("Claw Position", this.claw.getPosition());
+        this.telemetry.addData("Wrist State", this.wrist.getState());
+        this.telemetry.addData("Arm State", this.arm.getState());
+        this.telemetry.addData("Lift State", this.lift.getState());
+        this.telemetry.addData("Lift Position", this.lift.getPosition());
+    }
+
+    /*
+    Controller: 1
+    Button: A
+    Action: On button press, Arm hovers the floor with wrist parallel to arm
+     */
+    public void toTravelfromField() {
+        if (this.currentGP1.dpad_down && !this.previousGP1.dpad_down) {
+            if (fieldStates.getFieldLocation() == FieldStates.FieldLocation.TRAVELING &&
+                    this.lift.getPosition() < 40) {
+                Actions.runBlocking(new SequentialAction(
+                        this.wrist.toFloorPosition,
+                        new SleepAction(.75),
+                        this.arm.toFloorPosition
+                ));
+                fieldStates.setFieldLocation(FieldStates.FieldLocation.TRAVELING);
+            }
+        }
+    }
+
+    /*
+    Controller: 1
+    Button: Right Bumper
+    Action: On button press, open and closes claw
+     */
+    public void thePickup() {
+        if (this.currentGP1.right_bumper && !this.previousGP1.right_bumper) {
+            this.claw.switchState();
+        }
+    }
+
+    /*
+   Controller: 1
+   Button: Right Bumper
+   Action: On button press, open and closes claw
+    */
+    public void toHold() {
+        if (this.currentGP1.left_bumper && !this.previousGP1.left_bumper) {
+            Actions.runBlocking(new SequentialAction(
+                    arm.toParkPosition,
+                    wrist.toFloorPosition
+            ));
+        }
+    }
+
+    /*
+    Controller: 2
+    Button: Y
+    Action: On button press, lift to low bucket height,
+            arm to bucket position, wrist to bucket position
+     */
+    public void toLowBucketScore() {
+        if (this.currentGP1.a && !this.previousGP1.a) {
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.BUCKET);
+            Actions.runBlocking(new SequentialAction(
+                    lift.toLowBucket,
+                    arm.toBucketPosition,
+                    wrist.toBucketPosition
+            ));
+        }
+    }
+
+    /*
+    Controller: 2
+    Button: A
+    Action: On button press, lift to low bucket height,
+            arm to bucket position, wrist to bucket position
+     */
+    public void toHighBucketScore() {
+        if (this.currentGP1.b && !this.previousGP1.b) {
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.BUCKET);
+            Actions.runBlocking(new SequentialAction(
+                    lift.toHighBucket,
+                    arm.toBucketPosition,
+                    wrist.toBucketPosition
+            ));
+        }
+    }
+
+    /*
+    Controller: 2
+    Button: Direction Pad DOWN
+    Action: On directional press, lift to floor height,
+            arm to bucket position, wrist to floor position
+     */
+    public void toFieldFromBucketScore() {
+        if (this.currentGP1.dpad_right && !this.previousGP1.dpad_right) {
+            if (fieldStates.getFieldLocation() == FieldStates.FieldLocation.BUCKET) {
+                Actions.runBlocking(new SequentialAction(
+                        lift.toFloor,
+                        arm.toBucketPosition,
+                        wrist.toFloorPosition
+                ));
+//                fieldStates.setFieldLocation(FieldStates.FieldLocation.FIELD);
+            }
+        }
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/runmodes/DevTeleopRunModeCompetition.java

@@ -0,0 +1,185 @@
+package org.firstinspires.ftc.teamcode.runmodes;
+
+import com.acmerobotics.roadrunner.SequentialAction;
+import com.acmerobotics.roadrunner.SleepAction;
+import com.acmerobotics.roadrunner.ftc.Actions;
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.states.FieldStates;
+import org.firstinspires.ftc.teamcode.subsystem.ArmActionsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.ClawActionsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.LiftActionsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.MotorsSubsystem;
+import org.firstinspires.ftc.teamcode.subsystem.WristActionsSubsystem;
+
+public class DevTeleopRunModeCompetition {
+
+    /*
+    Subsystems
+     */
+    private MotorsSubsystem motors;
+    public ClawActionsSubsystem claw;
+    public ArmActionsSubsystem arm;
+    public WristActionsSubsystem wrist;
+    public LiftActionsSubsystem lift;
+
+    /*
+    Controllers
+     */
+    public Gamepad GP1;
+    public Gamepad GP2;
+    public Gamepad currentGP1;
+    public Gamepad previousGP1;
+    public Gamepad currentGP2;
+    public Gamepad previousGP2;
+    private Telemetry telemetry;
+    public FieldStates fieldStates;
+
+    private Follower follower;
+
+    public DevTeleopRunModeCompetition(HardwareMap hardwareMap, Telemetry telemetry, Gamepad gp1, Gamepad gp2) {
+        this.motors = new MotorsSubsystem(hardwareMap, telemetry, .55);
+        this.claw = new ClawActionsSubsystem(hardwareMap);
+        this.arm = new ArmActionsSubsystem(hardwareMap);
+        this.wrist = new WristActionsSubsystem(hardwareMap);
+        this.lift = new LiftActionsSubsystem(hardwareMap);
+        this.GP1 = gp1;
+        this.GP2 = gp2;
+        this.telemetry = telemetry;
+        this.currentGP1 = new Gamepad();
+        this.currentGP2 = new Gamepad();
+        this.previousGP1 = new Gamepad();
+        this.previousGP2 = new Gamepad();
+        this.fieldStates = new FieldStates();
+        this.follower = new Follower(hardwareMap);
+    }
+
+    public void init() {
+        this.motors.init();
+        this.claw.init();
+        this.arm.init();
+        this.wrist.init();
+        this.lift.init();
+        this.fieldStates.setFieldLocation(FieldStates.FieldLocation.TRAVELING);
+        follower.setMaxPower(.75);
+        follower.startTeleopDrive();
+    }
+
+    public void update() {
+        this.previousGP1.copy(currentGP1);
+        this.currentGP1.copy(this.GP1);
+        this.previousGP2.copy(currentGP2);
+        this.currentGP2.copy(this.GP2);
+
+        this.toHighBucketScore();
+        this.toLowBucketScore();
+        this.toArmParkPosition();
+        this.toArmParkThenSwitchBetweenSubmarineAndFloorPosition();
+        this.clawControl();
+
+//        this.motors.calculateTrajectory(this.GP1);
+        follower.setTeleOpMovementVectors(-this.GP1.left_stick_y, -this.GP1.left_stick_x, -this.GP1.right_stick_x);
+        follower.update();
+        this.telemetry.addData("Field State", this.fieldStates.getFieldLocation());
+        this.telemetry.addData("Claw State", this.claw.getState());
+        this.telemetry.addData("Claw Position", this.claw.getPosition());
+        this.telemetry.addData("Wrist State", this.wrist.getState());
+        this.telemetry.addData("Arm State", this.arm.getState());
+        this.telemetry.addData("Lift State", this.lift.getState());
+        this.telemetry.addData("Lift Position", this.lift.getPosition());
+    }
+
+    /*
+    Controller: 1
+    Button: A
+    Action: On button press, Arm hovers the floor with wrist parallel to arm
+     */
+    public void toHighBucketScore() {
+        if (this.currentGP1.triangle && !this.previousGP1.triangle) {
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.BUCKET);
+            Actions.runBlocking(new SequentialAction(
+                    this.wrist.toFloorPosition(),
+                    this.arm.toParkPosition(),
+                    this.lift.toHighBucketPosition(),
+                    new SleepAction(.5),
+                    this.arm.toBucketPosition(),
+                    new SleepAction(.5),
+                    this.wrist.toBucketPosition(),
+                    new SleepAction(.5),
+                    this.claw.openClaw(),
+                    new SleepAction(.5),
+                    this.wrist.toFloorPosition(),
+                    new SleepAction(.5),
+                    this.arm.toParkPosition(),
+                    this.lift.toFloorPosition()
+            ));
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.TRAVELING);
+        }
+    }
+
+    public void toLowBucketScore() {
+        if (this.currentGP1.circle && !this.previousGP1.circle) {
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.BUCKET);
+            Actions.runBlocking(new SequentialAction(
+                    this.wrist.toFloorPosition(),
+                    this.arm.toParkPosition(),
+                    this.lift.toLowBucketPosition(),
+                    new SleepAction(.5),
+                    this.arm.toBucketPosition(),
+                    new SleepAction(.5),
+                    this.wrist.toBucketPosition(),
+                    new SleepAction(.5),
+                    this.claw.openClaw(),
+                    new SleepAction(.5),
+                    this.wrist.toFloorPosition(),
+                    new SleepAction(.5),
+                    this.arm.toParkPosition(),
+                    this.lift.toFloorPosition()
+            ));
+            fieldStates.setFieldLocation(FieldStates.FieldLocation.TRAVELING);
+        }
+    }
+
+    public void clawControl() {
+        if (this.currentGP1.right_bumper && !this.previousGP1.right_bumper) {
+            this.claw.switchState();
+        }
+    }
+
+    public void toArmParkPosition() {
+        if (this.currentGP1.square && !this.previousGP1.square) {
+            Actions.runBlocking(this.arm.toParkPosition());
+        }
+    }
+
+    public void toArmParkThenSwitchBetweenSubmarineAndFloorPosition() {
+        if (this.currentGP1.cross && !previousGP1.cross) {
+            if (this.arm.getState() == ArmActionsSubsystem.ArmState.PARK) {
+                Actions.runBlocking(
+                        new SequentialAction(
+                                this.arm.toSubmarinePosition(),
+                                this.wrist.toFloorPosition()
+                        )
+                );
+            } else if (this.arm.getState() == ArmActionsSubsystem.ArmState.SUBMARINE) {
+                Actions.runBlocking(
+                        new SequentialAction(
+                                this.arm.toFloorPosition(),
+                                this.wrist.toFloorPosition()
+                        )
+                );
+            } else if (this.arm.getState() == ArmActionsSubsystem.ArmState.FLOOR) {
+                Actions.runBlocking(
+                        new SequentialAction(
+                                this.arm.toSubmarinePosition(),
+                                this.wrist.toFloorPosition()
+                        )
+                );
+            }
+        }
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/runmodes/Teleop.java

@@ -0,0 +1,89 @@
+package org.firstinspires.ftc.teamcode.runmodes;
+
+import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_LEFT_MOTOR;
+import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_LEFT_MOTOR_DIRECTION;
+import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_RIGHT_MOTOR;
+import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_RIGHT_MOTOR_DIRECTION;
+import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_LEFT_MOTOR;
+import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_LEFT_MOTOR_DIRECTION;
+import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_RIGHT_MOTOR;
+import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_RIGHT_MOTOR_DIRECTION;
+
+import com.qualcomm.robotcore.hardware.DcMotor;
+import com.qualcomm.robotcore.hardware.DcMotorEx;
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.pedroPathing.follower.Follower;
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+import org.firstinspires.ftc.teamcode.subsystem.ClawSubsystem;
+import org.firstinspires.ftc.teamcode.util.action.RunAction;
+
+public class Teleop {
+
+    private ClawSubsystem claw;
+    private Follower follower;
+    private DcMotorEx leftFront;
+    private DcMotorEx leftRear;
+    private DcMotorEx rightFront;
+    private DcMotorEx rightRear;
+    private Telemetry telemetry;
+
+    private Gamepad gamepad1;
+    private Gamepad currentGamepad1;
+    private Gamepad previousGamepad1;
+
+    public Teleop(HardwareMap hardwareMap, Telemetry telemetry, Follower follower, Gamepad gamepad1) {
+
+        claw = new ClawSubsystem(hardwareMap, telemetry);
+        initMotors(hardwareMap);
+
+        this.follower = follower;
+
+        this.telemetry = telemetry;
+        this.gamepad1 = gamepad1;
+
+        this.currentGamepad1 = new Gamepad();
+        this.previousGamepad1 = new Gamepad();
+    }
+
+    public void start() {
+        claw.start();
+        follower.startTeleopDrive();
+    }
+
+    public void update() {
+        previousGamepad1.copy(currentGamepad1);
+        currentGamepad1.copy(gamepad1);
+
+        if (currentGamepad1.a && !previousGamepad1.a)
+            claw.switchState();
+
+        follower.setTeleOpMovementVectors(-gamepad1.left_stick_y, -gamepad1.left_stick_x, -gamepad1.right_stick_x);
+        follower.update();
+
+        telemetry.addData("X", follower.getPose().getX());
+        telemetry.addData("Y", follower.getPose().getY());
+        telemetry.addData("Heading", Math.toDegrees(follower.getPose().getHeading()));
+        telemetry.addData("Claw State", claw.getState());
+        telemetry.update();
+    }
+
+    private void initMotors(HardwareMap hardwareMap) {
+        rightFront = hardwareMap.get(DcMotorEx.class, FRONT_RIGHT_MOTOR);
+        rightRear = hardwareMap.get(DcMotorEx.class, BACK_RIGHT_MOTOR);
+        leftFront = hardwareMap.get(DcMotorEx.class, FRONT_LEFT_MOTOR);
+        leftRear = hardwareMap.get(DcMotorEx.class, BACK_LEFT_MOTOR);
+
+        rightFront.setDirection(FRONT_RIGHT_MOTOR_DIRECTION);
+        rightRear.setDirection(BACK_RIGHT_MOTOR_DIRECTION);
+        leftFront.setDirection(FRONT_LEFT_MOTOR_DIRECTION);
+        leftRear.setDirection(BACK_LEFT_MOTOR_DIRECTION);
+
+        leftFront.setZeroPowerBehavior(DcMotor.ZeroPowerBehavior.BRAKE);
+        leftRear.setZeroPowerBehavior(DcMotor.ZeroPowerBehavior.BRAKE);
+        rightRear.setZeroPowerBehavior(DcMotor.ZeroPowerBehavior.BRAKE);
+        rightFront.setZeroPowerBehavior(DcMotor.ZeroPowerBehavior.BRAKE);
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/states/FieldStates.java

@@ -0,0 +1,18 @@
+package org.firstinspires.ftc.teamcode.states;
+
+public class FieldStates {
+
+    public enum FieldLocation {
+        BUCKET, SUBMARINE, FLOATING, TRAVELING
+    }
+
+    private FieldLocation fieldLocation;
+
+    public FieldLocation getFieldLocation() {
+        return fieldLocation;
+    }
+
+    public void setFieldLocation(FieldLocation fieldLocation) {
+        this.fieldLocation = fieldLocation;
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/subsystem/ArmActionsSubsystem.java

@@ -0,0 +1,88 @@
+package org.firstinspires.ftc.teamcode.subsystem;
+
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.armBucket;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.armFloor;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.armPark;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.armSubmarine;
+
+import androidx.annotation.NonNull;
+
+import com.acmerobotics.dashboard.telemetry.TelemetryPacket;
+import com.acmerobotics.roadrunner.Action;
+import com.acmerobotics.roadrunner.ftc.Actions;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+import com.qualcomm.robotcore.hardware.ServoImplEx;
+
+public class ArmActionsSubsystem {
+
+    public enum ArmState {
+        PARK, FLOOR, BUCKET, SUBMARINE
+    }
+
+    private ServoImplEx arm;
+    private ArmState state;
+
+    public ArmActionsSubsystem(HardwareMap hardwareMap) {
+        this.arm = hardwareMap.get(ServoImplEx.class, "arm-servo");
+    }
+
+    public class MoveToPosition implements Action {
+        private double positionValue;
+        private ArmState positionState;
+
+        public MoveToPosition(double positionValue, ArmState positionState) {
+            this.positionValue = positionValue;
+            this.positionState = positionState;
+        }
+
+        @Override
+        public boolean run(@NonNull TelemetryPacket telemetryPacket) {
+            arm.setPosition(positionValue);
+            setState(positionState);
+            telemetryPacket.put("Arm State", positionState);
+            return false;
+        }
+    }
+
+    public Action toParkPosition() {
+        return new MoveToPosition(armPark, ArmState.PARK);
+    }
+
+    public Action toSubmarinePosition() {
+        return new MoveToPosition(armSubmarine, ArmState.SUBMARINE);
+    }
+
+    public Action toFloorPosition() {
+        return new MoveToPosition(armFloor, ArmState.FLOOR);
+    }
+
+    public Action toBucketPosition() {
+        return new MoveToPosition(armBucket, ArmState.BUCKET);
+    }
+
+    public void setState(ArmState armState) {
+        this.state = armState;
+    }
+
+    public ArmState getState() {
+        return this.state;
+    }
+
+    public void init() {
+        this.arm.resetDeviceConfigurationForOpMode();
+        Actions.runBlocking(this.toParkPosition());
+    }
+
+    public void start() {
+        Actions.runBlocking(this.toParkPosition());
+    }
+
+    public double getPosition() {
+        return this.arm.getPosition();
+    }
+
+    public void setPosition(double position) {
+        this.arm.setPosition(position);
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/subsystem/ArmSubsystem.java

@@ -0,0 +1,87 @@
+package org.firstinspires.ftc.teamcode.subsystem;
+
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.armBucket;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.armFloor;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.armPark;
+
+import com.qualcomm.robotcore.hardware.HardwareMap;
+import com.qualcomm.robotcore.hardware.ServoImplEx;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.util.action.Actions;
+import org.firstinspires.ftc.teamcode.util.action.RunAction;
+
+public class ArmSubsystem {
+
+    public enum ArmState {
+        PARK, FLOOR, BUCKET
+    }
+
+    private ServoImplEx arm;
+    private ArmState state;
+    public RunAction toFloorPosition, toParkPosition, toBucketPosition;
+    private Telemetry telemetry;
+
+    public ArmSubsystem(HardwareMap hardwareMap, Telemetry telemetry) {
+        this.arm = hardwareMap.get(ServoImplEx.class, "arm-servo");
+        this.toParkPosition = new RunAction(this::toParkPosition);
+        this.toFloorPosition = new RunAction(this::toFloorPosition);
+        this.toBucketPosition = new RunAction(this::toBucketPosition);
+        this.telemetry = telemetry;
+    }
+
+    public void setState(ArmState armState) {
+        if (armState == ArmState.FLOOR) {
+            this.arm.setPosition(armFloor);
+        } else if (armState == ArmState.PARK) {
+            this.arm.setPosition(armPark);
+        } else if (armState == ArmState.BUCKET) {
+            this.arm.setPosition(armBucket);
+        }
+        this.state = armState;
+    }
+
+    public void toFloorPosition() {
+        this.setState(ArmState.FLOOR);
+    }
+
+    public void toParkPosition() {
+        this.setState(ArmState.PARK);
+    }
+
+    public void toBucketPosition() {
+        this.setState(ArmState.BUCKET);
+    }
+
+    public void switchState() {
+        if (this.state == ArmState.FLOOR) {
+            this.setState(ArmState.PARK);
+        } else if (this.state == ArmState.PARK) {
+            this.setState(ArmState.BUCKET);
+        } else if (this.state == ArmState.BUCKET) {
+            this.setState(ArmState.FLOOR);
+        }
+    }
+
+    public ArmState getState() {
+        return this.state;
+    }
+
+    public void init() {
+        this.arm.resetDeviceConfigurationForOpMode();
+        Actions.runBlocking(this.toParkPosition);
+    }
+
+    public void start() {
+        Actions.runBlocking(this.toParkPosition);
+    }
+
+    public double getPosition() {
+        return this.arm.getPosition();
+    }
+
+    public void setPosition(double position) {
+        this.arm.setPosition(position);
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/subsystem/ClawActionsSubsystem.java

@@ -0,0 +1,81 @@
+package org.firstinspires.ftc.teamcode.subsystem;
+
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.clawClose;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.clawOpen;
+
+import androidx.annotation.NonNull;
+
+import com.acmerobotics.dashboard.telemetry.TelemetryPacket;
+import com.acmerobotics.roadrunner.Action;
+import com.acmerobotics.roadrunner.ftc.Actions;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+import com.qualcomm.robotcore.hardware.Servo;
+
+public class ClawActionsSubsystem {
+
+    public enum ClawState {
+        CLOSED, OPEN
+    }
+
+    private Servo claw;
+    private ClawState state;
+
+    public ClawActionsSubsystem(HardwareMap hardwareMap) {
+        this.claw = hardwareMap.get(Servo.class, "claw-servo");
+    }
+
+    public class MoveToPosition implements Action {
+        private double positionValue;
+        private ClawState positionState;
+
+        public MoveToPosition(double positionValue, ClawState positionState) {
+            this.positionValue = positionValue;
+            this.positionState = positionState;
+        }
+
+        @Override
+        public boolean run(@NonNull TelemetryPacket telemetryPacket) {
+            setState(positionState);
+            claw.setPosition(positionValue);
+            telemetryPacket.put("Arm State", positionState);
+            return false;
+        }
+    }
+
+    public Action openClaw() {
+        return new MoveToPosition(clawOpen, ClawState.OPEN);
+    }
+
+    public Action closeClaw() {
+        return new MoveToPosition(clawClose, ClawState.CLOSED);
+    }
+
+    public void setState(ClawState clawState) {
+        this.state = clawState;
+    }
+
+    public ClawState getState() {
+        return this.state;
+    }
+
+    public void switchState() {
+        if (state == ClawState.CLOSED) {
+            Actions.runBlocking(openClaw());
+        } else if (state == ClawState.OPEN) {
+            Actions.runBlocking(closeClaw());
+        }
+    }
+
+    public void init() {
+        Actions.runBlocking(closeClaw());
+    }
+
+    public void start() {
+        Actions.runBlocking(closeClaw());
+    }
+
+    public double getPosition() {
+        return this.claw.getPosition();
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/subsystem/ClawSubsystem.java

@@ -0,0 +1,72 @@
+package org.firstinspires.ftc.teamcode.subsystem;
+
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.clawClose;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.clawOpen;
+
+import com.qualcomm.robotcore.hardware.HardwareMap;
+import com.qualcomm.robotcore.hardware.Servo;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.util.action.Actions;
+import org.firstinspires.ftc.teamcode.util.action.RunAction;
+
+public class ClawSubsystem {
+
+    public enum ClawState {
+        CLOSED, OPEN
+    }
+
+    private Servo claw;
+    private ClawState state;
+    public RunAction openClaw, closeClaw;
+    public Telemetry telemetry;
+
+    public ClawSubsystem(HardwareMap hardwareMap, Telemetry telemetry) {
+        this.claw = hardwareMap.get(Servo.class, "claw-servo");
+        this.openClaw = new RunAction(this::openClaw);
+        this.closeClaw = new RunAction(this::closeClaw);
+        this.telemetry = telemetry;
+    }
+
+    public void setState(ClawState clawState) {
+        if (clawState == ClawState.CLOSED) {
+            claw.setPosition(clawClose);
+        } else if (clawState == ClawState.OPEN) {
+            claw.setPosition(clawOpen);
+        }
+        this.state = clawState;
+    }
+
+    public ClawState getState() {
+        return this.state;
+    }
+
+    public void switchState() {
+        if (state == ClawState.CLOSED) {
+            setState(ClawState.OPEN);
+        } else if (state == ClawState.OPEN) {
+            setState(ClawState.CLOSED);
+        }
+    }
+
+    public void openClaw() {
+        setState(ClawState.OPEN);
+    }
+
+    public void closeClaw() {
+        setState(ClawState.CLOSED);
+    }
+
+    public void init() {
+        Actions.runBlocking(closeClaw);
+    }
+
+    public void start() {
+        Actions.runBlocking(closeClaw);
+    }
+
+    public double getPosition() {
+        return this.claw.getPosition();
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/subsystem/LiftActionsSubsystem.java

@@ -0,0 +1,102 @@
+package org.firstinspires.ftc.teamcode.subsystem;
+
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.liftPower;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.liftToFloorPos;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.liftToHighBucketPos;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.liftToLowBucketPos;
+
+import androidx.annotation.NonNull;
+
+import com.acmerobotics.dashboard.telemetry.TelemetryPacket;
+import com.acmerobotics.roadrunner.Action;
+import com.acmerobotics.roadrunner.ftc.Actions;
+import com.qualcomm.robotcore.hardware.DcMotor;
+import com.qualcomm.robotcore.hardware.DcMotorSimple;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+
+public class LiftActionsSubsystem {
+
+    public DcMotor lift;
+
+    public enum LiftState {
+        FLOOR, LOW_BUCKET, HIGH_BUCKET, FLOAT, SUBMARINE
+    }
+
+    private LiftState liftState;
+
+    public LiftActionsSubsystem(HardwareMap hardwareMap) {
+        lift = hardwareMap.get(DcMotor.class, "lift-motor");
+    }
+
+    public class MoveToPosition implements Action {
+        private int positionValue;
+        private LiftState positionState;
+
+        public MoveToPosition(int positionValue, LiftState positionState) {
+            this.positionValue = positionValue;
+            this.positionState = positionState;
+        }
+
+        @Override
+        public boolean run(@NonNull TelemetryPacket telemetryPacket) {
+            setState(positionState);
+            lift.setTargetPosition(positionValue);
+            lift.setMode(DcMotor.RunMode.RUN_TO_POSITION);
+            telemetryPacket.put("Lift State", positionState);
+            telemetryPacket.put("Lift Position", lift.getCurrentPosition());
+            boolean result = lift.getTargetPosition() - 15 < lift.getCurrentPosition() &&
+                    lift.getCurrentPosition() < lift.getTargetPosition() + 15;
+            return !result;
+        }
+    }
+
+    public Action toFloorPosition() {
+        return new MoveToPosition(liftToFloorPos, LiftState.FLOOR);
+    }
+
+    public Action toLowBucketPosition() {
+        return new MoveToPosition(liftToLowBucketPos, LiftState.LOW_BUCKET);
+    }
+
+    public Action toHighBucketPosition() {
+        return new MoveToPosition(liftToHighBucketPos, LiftState.HIGH_BUCKET);
+    }
+
+    public void switchState() {
+        if (this.liftState == LiftState.FLOOR) {
+            Actions.runBlocking(toLowBucketPosition());
+        } else if (this.liftState == LiftState.LOW_BUCKET) {
+            Actions.runBlocking(toHighBucketPosition());
+        } else if (this.liftState == LiftState.HIGH_BUCKET) {
+            Actions.runBlocking(toFloorPosition());
+        }
+    }
+
+    public void init() {
+        lift.setMode(DcMotor.RunMode.STOP_AND_RESET_ENCODER);
+        lift.setDirection(DcMotorSimple.Direction.REVERSE);
+        lift.setPower(liftPower);
+    }
+
+    private void setState(LiftState liftState) {
+        this.liftState = liftState;
+    }
+
+    public LiftState getState() {
+        return this.liftState;
+    }
+
+    public int getPosition() {
+        return lift.getCurrentPosition();
+    }
+
+    public void setPosition(int position) {
+        lift.setTargetPosition(position);
+        lift.setMode(DcMotor.RunMode.RUN_TO_POSITION);
+    }
+
+    public void start() {
+        Actions.runBlocking(toFloorPosition());
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/subsystem/LiftSubsystem.java

@@ -0,0 +1,95 @@
+package org.firstinspires.ftc.teamcode.subsystem;
+
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.liftPower;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.liftToSubmarinePos;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.liftToFloorPos;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.liftToHighBucketPos;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.liftToLowBucketPos;
+
+import com.qualcomm.robotcore.hardware.DcMotor;
+import com.qualcomm.robotcore.hardware.DcMotorSimple;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.util.action.Actions;
+import org.firstinspires.ftc.teamcode.util.action.RunAction;
+
+public class LiftSubsystem {
+
+    public DcMotor lift;
+    public RunAction toFloor, toLowBucket, toHighBucket, toFloat;
+
+    public enum LiftState {
+        FLOOR, LOW_BUCKET, HIGH_BUCKET, FLOAT
+    }
+
+    private LiftState liftState;
+    private Telemetry telemetry;
+
+    public LiftSubsystem(HardwareMap hardwareMap, Telemetry telemetry) {
+        lift = hardwareMap.get(DcMotor.class, "lift-motor");
+        toFloor = new RunAction(this::toFloor);
+        toLowBucket = new RunAction(this::toLowBucket);
+        toHighBucket = new RunAction(this::toHighBucket);
+        toFloat = new RunAction(this::toFloat);
+        this.telemetry = telemetry;
+    }
+
+    public void setTarget(int b) {
+        lift.setTargetPosition(b);
+        lift.setMode(DcMotor.RunMode.RUN_TO_POSITION);
+    }
+
+    public void switchState() {
+        if (this.liftState == LiftState.FLOOR) {
+            this.toFloat();
+        } else if (this.liftState == LiftState.FLOAT) {
+            this.toLowBucket();
+        } else if (this.liftState == LiftState.LOW_BUCKET) {
+            this.toHighBucket();
+        } else if (this.liftState == LiftState.HIGH_BUCKET) {
+            this.toFloor();
+        }
+    }
+
+    public void toFloor() {
+        this.setState(LiftState.FLOOR);
+        this.setTarget(liftToFloorPos);
+    }
+
+    public void toFloat() {
+        this.setState(LiftState.FLOAT);
+        this.setTarget(liftToSubmarinePos);
+    }
+
+    public void toLowBucket() {
+        this.setState(LiftState.LOW_BUCKET);
+        this.setTarget(liftToLowBucketPos);
+    }
+
+    public void toHighBucket() {
+        this.setState(LiftState.HIGH_BUCKET);
+        this.setTarget(liftToHighBucketPos);
+    }
+
+    public void init() {
+        lift.setMode(DcMotor.RunMode.STOP_AND_RESET_ENCODER);
+        lift.setDirection(DcMotorSimple.Direction.REVERSE);
+        lift.setPower(liftPower);
+    }
+
+    private void setState(LiftState liftState) {
+        this.liftState = liftState;
+    }
+
+    public LiftState getState() { return this.liftState; }
+
+    public int getPosition() {
+        return lift.getCurrentPosition();
+    }
+
+    public void start() {
+        Actions.runBlocking(toFloor);
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/subsystem/MotorsSubsystem.java

@@ -0,0 +1,140 @@
+package org.firstinspires.ftc.teamcode.subsystem;
+
+import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_LEFT_MOTOR;
+import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_LEFT_MOTOR_DIRECTION;
+import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_RIGHT_MOTOR;
+import static org.firstinspires.ftc.teamcode.PedroConstants.BACK_RIGHT_MOTOR_DIRECTION;
+import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_LEFT_MOTOR;
+import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_LEFT_MOTOR_DIRECTION;
+import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_RIGHT_MOTOR;
+import static org.firstinspires.ftc.teamcode.PedroConstants.FRONT_RIGHT_MOTOR_DIRECTION;
+
+import com.qualcomm.robotcore.hardware.DcMotor;
+import com.qualcomm.robotcore.hardware.Gamepad;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+
+public class MotorsSubsystem {
+
+    public HardwareMap hardwareMap;
+    public Telemetry telemetry;
+
+    public DcMotor frontLeftMotor;
+    public DcMotor backLeftMotor;
+    public DcMotor frontRightMotor;
+    public DcMotor backRightMotor;
+
+    public enum TravelState {
+        STOPPED, MOVING
+    }
+
+    public TravelState travelState;
+
+    public double power;
+
+    public MotorsSubsystem(HardwareMap hardwareMap, Telemetry telemetry) {
+        this.hardwareMap = hardwareMap;
+        this.telemetry = telemetry;
+        this.power = 1.0;
+    }
+
+    public MotorsSubsystem(HardwareMap hardwareMap, Telemetry telemetry, double power) {
+        this.hardwareMap = hardwareMap;
+        this.telemetry = telemetry;
+        this.power = power;
+    }
+
+    public void init() {
+        frontLeftMotor = hardwareMap.get(DcMotor.class, FRONT_LEFT_MOTOR);
+        backLeftMotor = hardwareMap.get(DcMotor.class, BACK_LEFT_MOTOR);
+        frontRightMotor = hardwareMap.get(DcMotor.class, FRONT_RIGHT_MOTOR);
+        backRightMotor = hardwareMap.get(DcMotor.class, BACK_RIGHT_MOTOR);
+
+        frontLeftMotor.setDirection(FRONT_LEFT_MOTOR_DIRECTION);
+        backLeftMotor.setDirection(BACK_LEFT_MOTOR_DIRECTION);
+        frontRightMotor.setDirection(FRONT_RIGHT_MOTOR_DIRECTION);
+        backRightMotor.setDirection(BACK_RIGHT_MOTOR_DIRECTION);
+
+        frontLeftMotor.setZeroPowerBehavior(DcMotor.ZeroPowerBehavior.BRAKE);
+        backLeftMotor.setZeroPowerBehavior(DcMotor.ZeroPowerBehavior.BRAKE);
+        frontRightMotor.setZeroPowerBehavior(DcMotor.ZeroPowerBehavior.BRAKE);
+        backRightMotor.setZeroPowerBehavior(DcMotor.ZeroPowerBehavior.BRAKE);
+
+        this.setState(TravelState.STOPPED);
+    }
+
+    public void setFrontLeftMotorPower(double power) {
+        frontLeftMotor.setPower(power);
+    }
+
+    public void setBackLeftMotorPower(double power) {
+        backLeftMotor.setPower(power);
+    }
+
+    public void setFrontRightMotorPower(double power) {
+        frontRightMotor.setPower(power);
+    }
+
+    public void setBackRightMotorPower(double power) {
+        backRightMotor.setPower(power);
+    }
+
+    public void calculateTrajectory(Gamepad gamepad1) {
+        double max;
+
+        // POV Mode uses left joystick to go forward & strafe, and right joystick to rotate.
+        double axial = -gamepad1.left_stick_y;  // Note: pushing stick forward gives negative value
+        double lateral = gamepad1.left_stick_x;
+        double yaw = gamepad1.right_stick_x;
+
+        // Combine the joystick requests for each axis-motion to determine each wheel's power.
+        // Set up a variable for each drive wheel to save the power level for telemetry.
+        double leftFrontPower = axial + lateral + yaw;
+        double leftBackPower = axial - lateral + yaw;
+
+        double rightFrontPower = axial - lateral - yaw;
+        double rightBackPower = axial + lateral - yaw;
+
+        // Normalize the values so no wheel power exceeds 100%
+        // This ensures that the robot maintains the desired motion.
+        max = Math.max(Math.abs(leftFrontPower), Math.abs(rightFrontPower));
+        max = Math.max(max, Math.abs(leftBackPower));
+        max = Math.max(max, Math.abs(rightBackPower));
+
+        if (max > 1.0) {
+            leftFrontPower /= max;
+            rightFrontPower /= max;
+            leftBackPower /= max;
+            rightBackPower /= max;
+        }
+
+        // Send calculated power to wheels
+        this.setFrontLeftMotorPower(leftFrontPower * this.power);
+        this.setFrontRightMotorPower(rightFrontPower * this.power);
+        this.setBackLeftMotorPower(leftBackPower * this.power);
+        this.setBackRightMotorPower(rightBackPower * this.power);
+
+        // Show the elapsed game time and wheel power.
+        this.telemetry.addData("Front left/Right", "%4.2f, %4.2f", leftFrontPower, rightFrontPower);
+        this.telemetry.addData("Back left/Right", "%4.2f, %4.2f", leftBackPower, rightBackPower);
+        this.telemetry.addData("Current State", this.getState());
+    }
+
+    public void setState(TravelState travelState) {
+        this.travelState = travelState;
+    }
+
+    public TravelState getState() {
+        return this.travelState;
+    }
+
+    public void setPower(DcMotor motor, double power) {
+        motor.setPower(power);
+        if (power < 0.05) {
+            this.setState(TravelState.MOVING);
+        } else {
+            this.setState(TravelState.STOPPED);
+        }
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/subsystem/WristActionsSubsystem.java

@@ -0,0 +1,86 @@
+package org.firstinspires.ftc.teamcode.subsystem;
+
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.wristBucket;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.wristFloor;
+
+import androidx.annotation.NonNull;
+
+import com.acmerobotics.dashboard.telemetry.TelemetryPacket;
+import com.acmerobotics.roadrunner.Action;
+import com.acmerobotics.roadrunner.ftc.Actions;
+import com.qualcomm.robotcore.hardware.HardwareMap;
+import com.qualcomm.robotcore.hardware.ServoImplEx;
+
+public class WristActionsSubsystem {
+
+    public enum WristState {
+        FLOOR, BUCKET
+    }
+
+    public ServoImplEx wrist;
+    public WristState state;
+
+    public WristActionsSubsystem(HardwareMap hardwareMap) {
+        this.wrist = hardwareMap.get(ServoImplEx.class, "wrist-servo");
+    }
+
+    public class MoveToPosition implements Action {
+        private double positionValue;
+        private WristState positionState;
+
+        public MoveToPosition(double positionValue, WristState positionState) {
+            this.positionValue = positionValue;
+            this.positionState = positionState;
+        }
+
+        @Override
+        public boolean run(@NonNull TelemetryPacket telemetryPacket) {
+            setState(positionState);
+            wrist.setPosition(positionValue);
+            telemetryPacket.put("Wrist State", positionState);
+            return false;
+        }
+    }
+
+    public Action toFloorPosition() {
+        return new MoveToPosition(wristFloor, WristState.FLOOR);
+    }
+
+    public Action toBucketPosition() {
+        return new MoveToPosition(wristBucket, WristState.BUCKET);
+    }
+
+    public void setState(WristState wristState) {
+        this.state = wristState;
+    }
+
+    public void switchState() {
+        if (state == WristState.FLOOR) {
+            Actions.runBlocking(this.toBucketPosition());
+        } else if (state == WristState.BUCKET) {
+            Actions.runBlocking(this.toFloorPosition());
+        }
+    }
+
+    public WristState getState() {
+        return this.state;
+    }
+
+    public void init() {
+        wrist.resetDeviceConfigurationForOpMode();
+        Actions.runBlocking(this.toFloorPosition());
+    }
+
+    public void start() {
+        Actions.runBlocking(this.toFloorPosition());
+    }
+
+    public void setPosition(double position) {
+        wrist.setPosition(position);
+    }
+
+    public double getPosition() {
+        return wrist.getPosition();
+    }
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/subsystem/WristSubsystem.java

@@ -0,0 +1,78 @@
+package org.firstinspires.ftc.teamcode.subsystem;
+
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.wristBucket;
+import static org.firstinspires.ftc.teamcode.configs.RobotConstants.wristFloor;
+
+import com.qualcomm.robotcore.hardware.HardwareMap;
+import com.qualcomm.robotcore.hardware.ServoImplEx;
+
+import org.firstinspires.ftc.robotcore.external.Telemetry;
+import org.firstinspires.ftc.teamcode.util.action.Actions;
+import org.firstinspires.ftc.teamcode.util.action.RunAction;
+
+public class WristSubsystem {
+
+    public enum WristState {
+        FLOOR, BUCKET
+    }
+
+    public ServoImplEx wrist;
+    public WristState state;
+    public RunAction toFloorPosition, toBucketPosition;
+    public Telemetry telemetry;
+
+    public WristSubsystem(HardwareMap hardwareMap, Telemetry telemetry) {
+        this.wrist = hardwareMap.get(ServoImplEx.class, "wrist-servo");
+        this.telemetry = telemetry;
+        toBucketPosition = new RunAction(this::toBucketPosition);
+        toFloorPosition = new RunAction(this::toFloorPosition);
+    }
+
+    public void setState(WristState wristState) {
+        if (wristState == WristState.FLOOR) {
+            wrist.setPosition(wristFloor);
+        } else if (wristState == WristState.BUCKET) {
+            wrist.setPosition(wristBucket);
+        }
+        this.state = wristState;
+    }
+
+    public void toFloorPosition() {
+        setState(WristState.FLOOR);
+    }
+
+    public void toBucketPosition() {
+        setState(WristState.BUCKET);
+    }
+
+    public void switchState() {
+        if (state == WristState.FLOOR) {
+            setState(WristState.BUCKET);
+        } else if (state == WristState.BUCKET) {
+            setState(WristState.FLOOR);
+        }
+    }
+
+    public WristState getState() {
+        return this.state;
+    }
+
+    public void init() {
+        wrist.resetDeviceConfigurationForOpMode();
+        Actions.runBlocking(toFloorPosition);
+    }
+
+    public void start() {
+        Actions.runBlocking(toFloorPosition);
+    }
+
+    public double getPosition() {
+        return this.wrist.getPosition();
+    }
+
+    public void setPosition(double position) {
+        this.wrist.setPosition(position);
+    }
+
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/util/action/Action.java

@@ -0,0 +1,11 @@
+package org.firstinspires.ftc.teamcode.util.action;
+
+import com.acmerobotics.dashboard.canvas.Canvas;
+import com.acmerobotics.dashboard.telemetry.TelemetryPacket;
+
+public interface Action {
+    boolean run(TelemetryPacket p);
+
+    default void preview(Canvas fieldOverlay) {
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/util/action/Actions.java

@@ -0,0 +1,22 @@
+package org.firstinspires.ftc.teamcode.util.action;
+
+import com.acmerobotics.dashboard.FtcDashboard;
+import com.acmerobotics.dashboard.canvas.Canvas;
+import com.acmerobotics.dashboard.telemetry.TelemetryPacket;
+
+public class Actions {
+
+    public static void runBlocking(Action a) {
+        FtcDashboard dash = FtcDashboard.getInstance();
+        Canvas c = new Canvas();
+        a.preview(c);
+
+        boolean b = true;
+        while (b && !Thread.currentThread().isInterrupted()) {
+            TelemetryPacket p = new TelemetryPacket();
+            p.fieldOverlay().getOperations().addAll(c.getOperations());
+            b = a.run(p);
+            dash.sendTelemetryPacket(p);
+        }
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/util/action/FieldConstants.java

@@ -0,0 +1,39 @@
+package org.firstinspires.ftc.teamcode.util.action;
+
+import com.acmerobotics.dashboard.config.Config;
+
+import org.firstinspires.ftc.teamcode.pedroPathing.localization.Pose;
+
+@Config
+public class FieldConstants {
+
+    public enum RobotStart {
+        BLUE_BUCKET,
+        BLUE_OBSERVATION,
+        RED_BUCKET,
+        RED_OBSERVATION
+    }
+
+    public static final Pose blueBucketStartPose = new Pose(8, 79.5, Math.toRadians(180));
+    public static final Pose blueObservationStartPose = new Pose(8, 36, Math.toRadians(180));
+    public static final Pose redBucketStartPose = new Pose(144-8, 79.5, 0);
+    public static final Pose redObservationStartPose = new Pose(144-8, 36, 0);
+
+    // Blue Preload Poses
+    public static final Pose blueBucketPreloadPose = new Pose(34.5, 79.5, Math.toRadians(180));
+
+    // Blue Bucket Sample Poses
+    public static final Pose blueBucketLeftSamplePose = new Pose(34.75, 113.5, Math.toRadians(66));
+    public static final Pose blueBucketLeftSampleControlPose = new Pose(32, 108);
+    public static final Pose blueBucketMidSamplePose = new Pose(33, 125.5, Math.toRadians(73));
+    public static final Pose blueBucketMidSampleControlPose = new Pose(47.5, 110);
+    public static final Pose blueBucketRightSamplePose = new Pose(33, 133, Math.toRadians(74));
+    public static final Pose blueBucketRightSampleControlPose = new Pose(46, 101);
+
+    public static final Pose blueBucketScorePose = new Pose(16, 128, Math.toRadians(-45));
+
+    public static final Pose blueBucketParkPose = new Pose(65, 97.75, Math.toRadians(90));
+    public static final Pose blueBucketParkControlPose = new Pose(60.25, 123.5);
+
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/util/action/RunAction.java

@@ -0,0 +1,30 @@
+package org.firstinspires.ftc.teamcode.util.action;
+
+import com.acmerobotics.dashboard.telemetry.TelemetryPacket;
+
+public class RunAction implements Action {
+
+    private final Runnable runnable;
+    private Runnable callback;
+
+    public RunAction(Runnable runnable) {
+        this.runnable = runnable;
+    }
+
+    public void runAction() {
+        runnable.run();
+        if (callback != null) {
+            callback.run();
+        }
+    }
+
+    public void setCallback(Runnable callback) {
+        this.callback = callback;
+    }
+
+    // Adapter to make Action compatible with the Action interface
+    public boolean run(TelemetryPacket p) {
+        runAction();
+        return false; // Regular actions complete after one execution
+    }
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/util/action/SequentialAction.java

@@ -0,0 +1,43 @@
+package org.firstinspires.ftc.teamcode.util.action;
+
+import com.acmerobotics.dashboard.canvas.Canvas;
+import com.acmerobotics.dashboard.telemetry.TelemetryPacket;
+
+import java.util.ArrayList;
+import java.util.Arrays;
+import java.util.List;
+
+public class SequentialAction implements Action {
+    private List<Action> actions;
+
+    public SequentialAction(List<Action> actions) {
+        this.actions = new ArrayList<>(actions);
+    }
+
+    public SequentialAction(Action... actions) {
+        this(Arrays.asList(actions));
+    }
+
+    @Override
+    public boolean run(TelemetryPacket p) {
+        if (actions.isEmpty()) {
+            return false;
+        }
+
+        if (actions.get(0).run(p)) {
+            return true;
+        } else {
+            actions.remove(0);
+            return run(p);
+        }
+    }
+
+    @Override
+    public void preview(Canvas fieldOverlay) {
+        for (Action a : actions) {
+            a.preview(fieldOverlay);
+        }
+    }
+
+
+}

TeamCode/src/main/java/org/firstinspires/ftc/teamcode/util/action/SleepAction.java

@@ -0,0 +1,31 @@
+package org.firstinspires.ftc.teamcode.util.action;
+
+import com.acmerobotics.dashboard.telemetry.TelemetryPacket;
+
+public class SleepAction implements Action {
+    private double dt;
+    private double beginTs = -1.0;
+
+    public SleepAction(double dt) {
+        this.dt = dt;
+    }
+
+    public static double now() {
+        return System.nanoTime() * 1e-9;
+    }
+
+    @Override
+    public boolean run(TelemetryPacket p) {
+        double t;
+        if (beginTs < 0) {
+            beginTs = now();
+            t = 0.0;
+        } else {
+            t = now() - beginTs;
+        }
+        boolean output = t < dt;
+        System.out.println(t + ":" + now() + ":" + beginTs + ":" + output);
+
+        return t < dt;
+    }
+}

build.dependencies.gradle

@@ -16,6 +16,9 @@ dependencies {
     implementation 'org.firstinspires.ftc:Vision:10.1.0'
     implementation 'androidx.appcompat:appcompat:1.2.0'
 
-    implementation 'com.acmerobotics.dashboard:dashboard:0.4.5'
+    implementation "com.acmerobotics.roadrunner:ftc:0.1.14"
-}
+    implementation "com.acmerobotics.roadrunner:core:1.0.0"
+    implementation "com.acmerobotics.roadrunner:actions:1.0.0"
+    implementation "com.acmerobotics.dashboard:dashboard:0.4.16"
 
+}