33 lines
1.9 KiB
Markdown
33 lines
1.9 KiB
Markdown
# FTC Hardware Config 2023
|
|
|
|
**DISCLAIMER:** View the robot like this.
|
|
|
|
|
|
|
|
Configuration Name: **CometBoTsChassis2023**
|
|
|
|
There are two robots: 14493-DS, and FTC-992M.
|
|
|
|
Below are the following configurations for our robots
|
|
|
|
| physical port | hub | robot part | robot part location | robot software config name |
|
|
|---------------|-----------|-----------------------------|-------------------------------|----------------------------|
|
|
| motor0 | control | UltraPlanetary HD hex motor | right front leg frame | Drive front rt |
|
|
| motor1 | control | UltraPlanetary HD hex motor | right back leg frame | Drive back rt |
|
|
| motor2 | control | UltraPlanetary HD hex motor | left front leg frame | Drive front lt |
|
|
| motor3 | control | UltraPlanetary HD hex motor | left back leg frame | Drive back lt |
|
|
| I2C B0 | control | Color sensor V3 | Left outside leg frame | color left |
|
|
| I2C B1 | control | Color sensor V3 | Right outside leg frame | color right |
|
|
| I2C B0 | expansion | 2m distance sensor | Middle Back outside leg frame | distance |
|
|
| motor0 | expansion | UltraPlanetary HD hex motor | left back arm frame | arm raise |
|
|
| motor1 | expansion | Core Hex Motor | right back arm frame | hang |
|
|
| motor3 | expansion | Digital device | arm frame back right | axle encoder |
|
|
| Servo 0 | expansion | Servo | on arm | wrist |
|
|
| Servo 1 | expansion | Servo | on arm | gripper |
|
|
|
|
|
|
|
|
|
|
|
|
|