Updated Using Two Expansion Hubs (markdown)

FTC Engineering
2020-02-14 09:58:10 -05:00
parent 30276b564c
commit fe6be5be9a

@ -60,6 +60,8 @@ The USB serial number of the Expansion Hub and its currently assigned address sh
Use the dropdown list control on the right hand side to change the address to a non-conflicting value. Use the dropdown list control on the right hand side to change the address to a non-conflicting value.
**Important Note:** An address of 1 is typically reserved for a Control Hub. If you are using two Expansion Hubs with an Android phone Robot Controller, than you should avoid assigning an address of 1 to either Expansion Hub.
<p align="center"><img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/Advanced/TwoExpansionHubs/NewAddress.jpg" width="175"> </p> <p align="center"><img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/Advanced/TwoExpansionHubs/NewAddress.jpg" width="175"> </p>
Push the "Done" button to change the address. You should see a message indicating that the Expansion Hub's address has been changed. Push the "Done" button to change the address. You should see a message indicating that the Expansion Hub's address has been changed.