From cb28b6ed7853677e32bce5be424d3bcb83c7b943 Mon Sep 17 00:00:00 2001 From: FTC Engineering Date: Fri, 20 Sep 2019 10:56:54 -0400 Subject: [PATCH] Updated Troubleshooting (markdown) --- Troubleshooting.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Troubleshooting.md b/Troubleshooting.md index ffdf9f5..6adfed4 100644 --- a/Troubleshooting.md +++ b/Troubleshooting.md @@ -39,7 +39,7 @@ Instead, follow these directions. 1. Backup copies of your old Blocks and OnBot Java op modes. 2. Download a 32-bit only version of the Robot Controller app from here. 3. Install this 32-bit only version of the Robot Controller onto your Robot Controller device: - - If you are a Control Hub user, follow the instructions [here](Managing-a-Control-Hub#Updating-the-Robot-Controller-App) to install the 32-bit only version of the app. + - If you are a Control Hub user, follow the instructions [here](Managing-a-Control-Hub#Updating-the-Robot-Controller-App) to install the 32-bit only version of the app. **Important Note:** _When you update your Control Hub, make sure you use the 32-bit version of the app that you downloaded from step #2!_ - If you are a phone user, since you cannot use Google Play, you will have to [sideload](https://www.xda-developers.com/sideload-apps-how-to/) the 32-bit version of the app onto your Robot Controller Android phone. There are good resources on the Web that show you [how to sideload an app](https://www.xda-developers.com/sideload-apps-how-to/). 4. After you update your Robot Controller with the 32-bit only version of the app, make sure you have a valid configuration file activated. 5. You can now use the 32-bit only version of the app to edit an run your Vuforia-enabled op modes using an externally connected webcam.