From c8521b049f263cc97a0dfd7772723899fc04e55d Mon Sep 17 00:00:00 2001
From: FTC Engineering <ftctechnh@users.noreply.github.com>
Date: Wed, 20 Sep 2017 14:02:59 -0400
Subject: [PATCH] Updated Using Two Expansion Hubs (markdown)

---
 Using-Two-Expansion-Hubs.md | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Using-Two-Expansion-Hubs.md b/Using-Two-Expansion-Hubs.md
index fc4a0f4..74a418e 100644
--- a/Using-Two-Expansion-Hubs.md
+++ b/Using-Two-Expansion-Hubs.md
@@ -19,7 +19,7 @@ To follow along with the instructional steps in this document, you will need the
 | REV Robotics XT30 Extension Cable (REV-31-1394). | <img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/Advanced/TwoExpansionHubs/xt30Extension.jpg"  width="150"> |
 
 ### Checking the Address of an Expansion Hub 
-Before you connect your two Expansion Hubs together, you should first check the serial addresses associated with each of the Hubs.   
+Before you connect your two Expansion Hubs together, you should first check the serial address associated with each of the Hubs.   
 
 Each Expansion Hub has a serial address assigned to it at the factory.   By default, this serial address is the same for all Hubs.  If you want to connect two Expansion Hubs together, then you will have to change the address of one of your Hubs.