From 6587a5e2e6c6815a9d2482b2817205ce853fc39f Mon Sep 17 00:00:00 2001 From: FTC Engineering Date: Tue, 9 Apr 2019 11:07:55 -0400 Subject: [PATCH] Updated Connecting Devices to a Control or Expansion Hub (markdown) --- Connecting-Devices-to-a-Control-or-Expansion-Hub.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Connecting-Devices-to-a-Control-or-Expansion-Hub.md b/Connecting-Devices-to-a-Control-or-Expansion-Hub.md index c0449c7..41fcb61 100644 --- a/Connecting-Devices-to-a-Control-or-Expansion-Hub.md +++ b/Connecting-Devices-to-a-Control-or-Expansion-Hub.md @@ -3,7 +3,7 @@ This section demonstrates how to connect and configure devices to your REV Robot ### Connecting 12V Power to the Expansion Hub The Expansion Hub draws power from a 12V rechargeable battery. For safety reasons, the battery has a 20A fuse built in. A mechanical switch is used to turn on/turn off the power. -Note that it will take an estimated 5 minutes to complete this task. +Note that it will take an estimated 5 minutes to complete this task. | Connecting 12V Power to the Expansion Hub | | ---- |