From 59dc47eda709ffb02676897b5309ac2f68d3eb86 Mon Sep 17 00:00:00 2001 From: Westside Robotics Date: Fri, 25 Feb 2022 11:08:09 -0800 Subject: [PATCH] Add primary (paired DS app) method for changing name of Control Hub. --- Managing-a-Control-Hub.md | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/Managing-a-Control-Hub.md b/Managing-a-Control-Hub.md index 1c6f180..e27e851 100644 --- a/Managing-a-Control-Hub.md +++ b/Managing-a-Control-Hub.md @@ -1,9 +1,11 @@ ### Changing the Name By default, the Control Hub has a name that begins with the phrase "FTC-" and ends with four characters that are assigned at the factory. In order to comply with game manual rule \, the name should be changed. -You can change the name of a Control Hub using a laptop or Chromebook that is connected to the Hub's Program & Management page. +The name of a Control Hub (or Robot Controller phone) can be changed from a paired DS app, as shown [here](https://github.com/FIRST-Tech-Challenge/FtcRobotController/wiki/Managing-a-Smartphone-Robot-Controller#changing-the-name). -**Important Note:** Changing the name of a Control Hub changes the name of the Hub's wireless network. Once the name is changed, you will have to connect your devices (Driver Station and programming laptop/Chromebook) to the new network. +As an alternate, you can change the name of a Control Hub at the _Manage_ page from a connected Driver Station or laptop, as described below. + +**Important Note:** Changing the name of a Control Hub changes the name of the Hub's wireless network. Once the name is changed, you will have to connect your devices (Driver Station and programming laptop) to the new network. | Changing the Name of a Control Hub| | ---- |