diff --git a/Connecting-Devices-to-a-Control-or-Expansion-Hub.md b/Connecting-Devices-to-a-Control-or-Expansion-Hub.md
index e17953f..e92d8c5 100644
--- a/Connecting-Devices-to-a-Control-or-Expansion-Hub.md
+++ b/Connecting-Devices-to-a-Control-or-Expansion-Hub.md
@@ -11,7 +11,7 @@ Note that it will take an estimated 5 minutes to complete this task.
 
 | Connecting 12V Power to the Hub |
 | ---- |
-| 1. If your 12V battery has a Tamiya style connector, connect the Tamiya to XT30 adapter cable to the matching end of the switch cable.<br/><br/><p align="center"><img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/Connecting12VStep1.jpg" width="250"></p><br/>Important Note: Do not connect the 12V battery to the Tamiya adapter yet.  We will connect the battery during a later step. |
+| 1. If your 12V battery has a Tamiya style connector, connect the Tamiya to XT30 adapter cable to the matching end of the switch cable.<br/><br/><p align="center"><img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/Connecting12VStep1.jpg" width="250"></p><br/>**Important Note:** Do not connect the 12V battery to the Tamiya adapter yet.  We will connect the battery during a later step. |
 | 2. Connect the other end of the switch cable to a matching XT30 port on the Hub.<br/><br/><p align="center"><img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/Connecting12VStep2.jpg" width="350"></p> |
 | 3. Verify that the switch is in the OFF position.<br/><br/><p align="center"><img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/Connecting12VStep3.jpg" width="250"></p> |
 | 4. Connect the 12V battery to the Tamiya to XT30 cable.<br/><br/><p align="center"><img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/Connecting12VStep4.jpg" width="350"></p> |
@@ -19,7 +19,7 @@ Note that it will take an estimated 5 minutes to complete this task.
 | 6. Turn off the switch and verify that the Hub is off.  Note that the Hub’s LED should not be illuminated.<br/><br/><p align="center"><img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/Connecting12VStep6.jpg" width="350"></p> |
 
 ### Connecting a Motor to the Hub
-The Hub can drive up to four (4) 12V DC motors per Hub.  The Hub uses a type of electrical connector known as a 2-pin JST VH connector.  Many of the FIRST-approved 12V DC motors are equipped with Anderson Powerpole connectors.  An adapter cable can be used to connect the Anderson Powerpole connectors to the Hub motor port.
+The Hub can drive up to four (4) 12V DC motors per Hub.  The Hub uses a type of electrical connector known as a 2-pin JST VH connector.  Many of the FIRST-approved 12V DC motors are equipped with Anderson Powerpole connectors.  An adapter cable can be used to connect the Anderson Powerpole connectors to the Hub motor port (see [FIRST Tech Challenge Robot Wiring Guide](https://www.firstinspires.org/sites/default/files/uploads/resource_library/ftc/robot-wiring-guide.pdf) for more information).
 <p align="center">
 
 <img src="https://github.com/FIRST-Tech-Challenge/WikiSupport/blob/master/ftc_app/images/MotorRig.jpg" width="350">