From 489004df9c40c3bd06cc2b00bccb57bb8549a22d Mon Sep 17 00:00:00 2001 From: FTC Engineering Date: Tue, 23 Jul 2019 11:39:40 -0400 Subject: [PATCH] Updated Managing a Control Hub (markdown) --- Managing-a-Control-Hub.md | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/Managing-a-Control-Hub.md b/Managing-a-Control-Hub.md index c496e55..6e37c15 100644 --- a/Managing-a-Control-Hub.md +++ b/Managing-a-Control-Hub.md @@ -24,6 +24,17 @@ You can change the password of a Control Hub using a laptop or Chromebook that i | 1. On the _Manage_ page of the Control Hub user interface, find specify your new password and then confirm this new password in the _Access Point Password_ section of the page. Press the _Change Password_ to change the password.

[[/images/Managing-a-Control-Hub/changePassword.jpg]]| | 2. After you press the _Change Password_ button, a dialog box will appear, indicating that the password has been changed and that you will need to reconnect to the wireless network using the new password.

[[/images/Managing-a-Control-Hub/changePasswordWarning.jpg]]| +### Resetting a Control Hub +If you forget the network name or password for a Control Hub, you can reset the Hub's name and password back to their factory default values. Resetting a Control Hub will restore its default network name and password. + +**Important Note:** Existing configuration files and op modes should not be affected by the reset. This includes op modes that were created using the Blocks, OnBot Java and Android Studio tools. + +| Resetting a Control Hub | +| ---- | +| 1. Turn off the power to your Control Hub for 5 seconds. | +| 2. Press and hold the button on the Control Hub (see image below).

[[/images/Managing-a-Control-Hub/controlHubButton.jpg]]| +| 3. Power on the Control Hub while continuing to hold the button. Monitor the LED while the Control Hub is rebooting. Eventually, the LED will switch from being solid blue, to a multi-color blink pattern.

When the reset has started, the LED should blink purple, yellow, blue, and then red. This pattern should occur five times in rapid succession.

Once the multi-colored blink pattern is complete, you can release the button. The Control Hub's network name and password should be restored to their factory values.

Note that the reboot and reset process should take approximately 30 seconds to complete.| + ### Changing the WiFi Channel hello