From 4452531a26c8c195c3697627728a844fad5f93d1 Mon Sep 17 00:00:00 2001 From: FTC Engineering Date: Fri, 26 Jul 2019 19:23:22 -0400 Subject: [PATCH] Updated Configuring Your Android Devices (markdown) --- Configuring-Your-Android-Devices.md | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Configuring-Your-Android-Devices.md b/Configuring-Your-Android-Devices.md index c1f6e13..48737b8 100644 --- a/Configuring-Your-Android-Devices.md +++ b/Configuring-Your-Android-Devices.md @@ -85,7 +85,7 @@ Also note that it will take an estimated 10 minutes to complete this task. | Step| Image | | ----------- | :---: | | 1. Connect an approved 12V battery to the power
switch (REV-31-1387) and make sure the switch
is in the off position. Connect the switch to an XT30
port on the Control Hub and turn the switch on.

The LED should initially be blue on the Control Hub. | [[/images/Configuring-Your-Android-Devices/PairingControlHubStep1.jpg]] | -| 2. It takes approximately 40 seconds for the
Control Hub to power on. The Control Hub is
ready to pair with the Driver Station when
the LED turns green.

Note: the light blinks blue every ~5 seconds
to indicate that the Control Hub is healthy. | [[/images/Configuring-Your-Android-Devices/PairingControlHubStep2.jpg]] | +| 2. It takes approximately 18 seconds for the
Control Hub to power on. The Control Hub is
ready to pair with the Driver Station when
the LED turns green.

Note: the light blinks blue every ~5 seconds
to indicate that the Control Hub is healthy. | [[/images/Configuring-Your-Android-Devices/PairingControlHubStep2.jpg]] | | 3. On the Driver Station device, browse the
available apps and locate the **FTC Driver Station**
icon. Tap on the icon to launch the Driver Station
app.

Note that the first time you launch the app
your Android device might prompt you for
permissions that the app will need to run properly.
Whenever prompted, press **Allow** to grant
the requested permission. | [[/images/Configuring-Your-Android-Devices/PairingControlHubStep3.jpg]] | | 4. Touch the three vertical dots on the upper right
hand corner of the main screen of the FTC Driver
Station app. This will launch a pop-up menu. | [[/images/Configuring-Your-Android-Devices/PairingControlHubStep4.jpg]] | | 5. Select **Settings** from the pop-up menu. | [[/images/Configuring-Your-Android-Devices/PairingControlHubStep5.jpg]] |