diff --git a/Configuring-Your-Android-Devices.md b/Configuring-Your-Android-Devices.md
index e5a5757..69f90e4 100644
--- a/Configuring-Your-Android-Devices.md
+++ b/Configuring-Your-Android-Devices.md
@@ -81,7 +81,7 @@ Note that it will take an estimated 10 minutes to complete this task.
| Step| Image |
| ----------- | :---: |
-| 1. Connect an approved 12V battery to the power switch
(REV-31-1387) and make sure the switch is in the off position.
Connect the switch to an XT30 port on the Control Hub
and turn the switch on.
The LED should initially be blue on the Control Hub. | 
|
+| 1. Connect an approved 12V battery to the power
switch (REV-31-1387) and make sure the switch
is in the off position. Connect the
switch to an XT30 port on the Control Hub
and turn the switch on.
The LED should initially be blue on the Control Hub. | |
| 2. It takes approximately 40 seconds for the Control Hub to
power on. The Control Hub is ready to pair with the Driver
Station when the LED turns green.
Note: the light blinks blue every ~5 seconds to indicate
that the Control Hub is healthy. | 
|
| 3. Using the Android App Drawer, locate the
**FTC Driver Station** icon. Tap on the icon to launch the
Driver Station app. | 
|
| 4. Touch the three vertical dots on the upper right
hand corner of the main screen of the FTC Driver Station
app. This will launch a pop-up menu. | 
|